1 / 5
Tronxy Bed Rail Webcam Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts to the 10mmx10mm cross beam that the heatbed mounts to.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
PLEASE BE CAREFUL WHEN MOUNTING THIS UNDERNEATH YOUR EXTRUSION. Make sure the camera can clear it when the bed is pressed up against the nozzle. If you don't something WILL break.
Webcam mount that uses the metal rails the bed screws onto. NOTE: THE LEVELING SCREW WILL NEED TO GO ON UPSIDE DOWN. The webcam mounting screws will not fit otherwise.
Used 4 M3x10MM screws and nuts. Use whatever screw that fits to mount your camera.
Printed with supports on a 0.4mm nozzle. Gyroid 15% with Arachne walls.
Updated 1/30/2025: Lengthened bracket to help cam clear top extrusion.