TronXY X5SA PRO 18mm Capacitive sensor bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just my modified capacitive sensor bracket for my TronXY X5SA PRO. I drilled new holes above the stock bracket…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Just my modified capacitive sensor bracket for my TronXY X5SA PRO. I drilled new holes above the stock bracket location to give some adjustability to the sensor and found that the bracket blocked the stock fan shroud mounting bolt. I used Design Spark to make a notch in the corner of the bracket so the stock mounts could be used. Worked great on my printer and hopefully works well for you. Please me a comment about how the bracket works for you, so I can improve on my design work and make better products.
Print Settings
Printer:
TronXY X5SA PRO
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
100%
Filament:
Inland ABS
Orange
Notes:
I used Inland Orange ABS at 240 degrees printed on its bottom for the main bracket and vertical for the sensor holder.
Print Speed of 40mm/s.
Category: 3D Printer Parts