TronXY X5SA PRO 18mm Capacitive sensor bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just my modified capacitive sensor bracket for my TronXY X5SA PRO. I drilled new holes above the stock bracket…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Just my modified capacitive sensor bracket for my TronXY X5SA PRO. I drilled new holes above the stock bracket location to give some adjustability to the sensor and found that the bracket blocked the stock fan shroud mounting bolt. I used Design Spark to make a notch in the corner of the bracket so the stock mounts could be used. Worked great on my printer and hopefully works well for you. Please me a comment about how the bracket works for you, so I can improve on my design work and make better products.
Print Settings
Printer:
TronXY X5SA PRO
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
100%
Filament:
Inland ABS
Orange
Notes:
I used Inland Orange ABS at 240 degrees printed on its bottom for the main bracket and vertical for the sensor holder.
Print Speed of 40mm/s.
Category: 3D Printer Parts