Traffic Cone Kit Card (MMU & filament change) 1:24 and 1:18 scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get more than two dozens multicolor traffic cones in one print - or print them single. No supports needed.
- Ocena
- 5 / 5
- Polubienia
- 735
- Pobrania
- 2375
- Wydruki
- 21
- Wyświetlenia
- 7531
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
Get more than two dozens multicolor traffic cones in one print - or print them single.
They also fit the 1:24 car models I have published.
Sizes
1:18 = 30.5mm height
1:24 = 22.8mm height
Print in 0.2mm layer height.
No supports needed.
Single color & multicolor
The cones are available in a 3MF file for a one-color print.
There are 3MF-files with predefined colors intended for users of AMS or MMU.
Manual filament change
1:24 filament changes
every 4,5mm, so at 4,5mm - 9mm - 13,5mm - 18mm
every 23 layers (@0.2mm layer height), so at 23 - 46 - 69 (hehehe) - 92
1:18 filament changes
every 6mm, so at 6mm - 12mm - 18mm - 24mm
every 30 layers (@0.2mm layer height), so at 30 - 60 - 90 - 120
Do you like my work? I would be very happy if you would support my work on Ko-fi.