Liczymy pasujące modele…
Version 2 Neu: Höhe 150mm - kompatibel mit Boxen Höhe 50 + 100 mm / gleiche Verbinder New: Height 150mm - compatible with boxes height 50 + 100 mm / same connectors…
Add gears to the fun linkage construction kit. These are designed to be places horizontally and vertically adjacent although they may work in other ways. The tolerance is loose so should be easy to print.…
Metriccano is not only a good toy, but it puts the “rapid” back in “rapid prototyping.” There is a library of parts based on 10mm centres that can be fastened together with ordinary M3 screws and nuts. While it looks like a construction…
I needed a brick man model for stop motion video, but could not find one that would not fall apart at the slightest bump. So I started from scratch and designed one that will stay togeather. I have two trays .. one for most of the parts…
Note: Depending on the accuracy of your printer, the rods may not fit properly. Therefore, before printing the final-length parts, run a test and adjust their dimensions accordingly.
Constuction Otto 👷 Construction Otto has a lifting mechanism terminating in a universal tool mount. A variety of different tools can be used with this mount Included here are a scoop, a bulldozer attachment, a snow plough, a roller and a…
1:1 Scale Oculudentavis sculpture. recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load. (I know that this creature is heavily debated between being a bird or…
This project features a set of soft building blocks for young children, inspired by and compatible with Clemmy-style construction blocks. The design is intended for toddlers and preschoolers, focusing on safe play, creativity, and easy…
Lid Assembly Instructions With the lid upside down, insert the inner and outer linkages. The orientation of the outer linkages matter. One face is flat, while the opposite has a slight taper. The flat side should be against the lid. The…
Some charms i made for construction (Hackclub)
Add professional realism to your industrial and urban scenes with this Construction Worker / Site Engineer 3D printable model. Featuring a hard hat, high-visibility safety vest, work boots, and rolled blueprint plans, this character…
C-Hinge Assembly for Polyknot Construction The components for building a new class of entangled geometric structures. A polyknot is a structure that combines the topology of knots and links with the geometry of polyhedra — organizing…
Replacement battery cover for the Calculated Industries (Construction Master Pro Desktop ) calculator. I have 2 lost one cover. I modeled this cover to replace the original.
A spacer that can be used for different construction applications. It has 2mm, 3mm, 4mm, 5mm, and 6mm sides.
This model is compatible with the lego system.
Video: The Basic Walker in action. The Basic Walker is a walking mechanism to which skins may be added to create a range of walking toys. Print in place bearings and gear trains have a relatively large amount of backlash. In the ordinary…
Variant of fully printed 3D printer based on Simpson GUS concept . Printer was modified to be able to use squared heated bed and touch probe. As firmware was intended to be used modified Marlin with standard Atmega2550 and Ramps 1.4 board…
This is a holder for a router with 65 mm diameter. All the information can be found on https://blog.altholtmann.com/untertischfraese-tischkreissaege-kombination/ Update 03.11.2023 Added new holes for another type of router plate. The new…
Build your own truncated icosahedron tile by tile. It has 12 regular pentagonal faces, 20 regular hexagonal faces, 60 vertices and 90 edges (wiki). You will need to print 12 pentagons, 20 hexagons and 40 to 60 clips ;-) Print the tiles…
For people who own this printer, they are familiar with the weak vertical construction. Because of the shaking the printing quality is suffer. So I made this to prevent the problem. After mounting it, the better surface finish was…
Replacement parts for Melissa & Doug Construction Set in a Box This model provides replacement components for the Melissa & Doug Construction Set. These parts are designed to replace missing or broken pieces and keep the set usable. The…
This plastic clip can be inserted into the 8mm groove of a 30x30 aluminum "Bosch" profile. Insert the clip lengthwise, then twist it 90 degree to lock it in place. (No need to slide it in from the end of the profile) As printed the latch…
Korrekturen: 2026.05.23 - R3A 150x150x100 - BM - S2 _______________________________________________________________________________________________________ Link zu Version2 Höhe 150 mm / New: Link to version height 150 mm…
Say hello to the 3D Printable Construction Worker! This hardworking little figure is perfect for adding some builder charm to your 3D printed collection. Fun, detailed, and ready for the job Please note: if you download this item - you…
Version 2 Neu: Höhe 150mm - kompatibel mit Boxen Höhe 50 + 100 mm / gleiche Verbinder New: Height 150mm - compatible with boxes height 50 + 100 mm / same connectors…
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás velmi šikovné konzoly na police, stavební console . Jsou v rozměrech: 20x20, 30x30, 40x40, 50x50, 60x60 a 70x70. Konzoly jsou velmi pevné a na zkoužku unesly 50…
Replacement wheel to print (one for each player) for the game Barrage. It's way more practical than the cardboard one. It's made by to pieces, pinched together by a pin (male + female) included. As you can see from the pictures, it's easy…
Add gears to the fun linkage construction kit. These are designed to be places horizontally and vertically adjacent although they may work in other ways. The tolerance is loose so should be easy to print.…
Simple bouchon à poser sur des évacuations en PVC DN100 pour éviter les odeurs sur les chantiers. Simple plug for use with DN100 PVC drains to prevent odors on construction sites. [BuyMeACoffee]( https://buymeacoffee.com/lafeeleonie )
A simple rake model – a 16-piece kit. The design follows the traditional wooden rake construction. It can be used as a back or head scratcher, or as a small rake :-D for your mini farm. I tried several models of traditional construction.…
On my model train layout I wanted a construction yard were a new house was build. Since the type of house and construction I was looking for is not available as a kit, I decided to design and print it myself. It's not perfect and…
For my H0 model railway I needed some piles to form a nice wall. Couldn't find one to be printed without a Resin printer, so I designed one myself that can be printed on most common 3D Printers. Post-Printing Category: Hobby
I created a construction tube that can be printed along with some attachment pieces, then fastened together with standard PC fan screws. You can see my proof of concept in my YouTube video at the bottom of this description! I recommend…
It's a flexible prototyping system based on a hexagon shaped brick and two types of octagon shaped bricks, with a snap-fit connecting system that also allows for custom add-ons. The kit also provides various types of gears, with a…
Quickly draw guides to cut perfect cardboard circles and arcs! With the Makedo laser cut Rotate-Template. Each Rotate-Template is supported with 1x Makedo Scru. And can be used in conjunction with the Makedo Scru-Driver, Mini-Tool, and…
The .3mf file includes the text already placed into the plaque of the stand all you have to do is click text then use the text object button on Bambu Lab Studios or Orca Slicer or any Slicer then insert any name you wish! Want to sell…
These are some files that help you fit a runcam 2 to RC models, primarily addressing CAD designers who make their own construction in a (vector based) CAD or (polygon based) 3D application. Note that these files are not meant to build a…
PlanToys has a construction set (https://plantoys.com/product/construction-set-5539) which includes screws and blocks of various sizes. They are made out of wood and unfortunately the threads tend to break off so I designed this…
5 cookie cutters for construction Cars. Includes a Paver, Excavator, Mixer, Hauler and a Loader
I had an old Anet E10 printer laying around. In retrospective this was not a great printer but it does the job for years. I wanted to design my own printer based on the parts I already have. I believe the most parts being similar to Anet…
This set it is the best collection of pieces I could find for makedo style cardboard construction tools for kids. I tested about 5 different saws, punches, keys and screws and these are my favorites. This brings together a chain of…
Building something big? This sign is just what you need! A weathered, yellow and black warning sign with the text "Under Construction" in bold black letters. Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Yellow Swap…
My first published model. All parts are optimitimized for 3d printing. All parts are printed without support or brim, except propeller. You will need supports for propeller, this part has too shallow slope (low pitch angle) and it is…
A toy construction helmet for children 1-3 with an adjustable harness, optional attachments, and an optional logo. The harness joins three bands with plastic rivets, and secures the fit with a fourth snap-back piece. Four clips secure the…
I created this model to keep sawdust / drywall dust from falling down into my floor drains and drain tile. There are two versions of this model, one is a loose fit and the other is a press fit. You may need to trim the tabs on the press…
This model is based off of the Tidi-Hook. I used 0.2mm layer height with 3 wall loops and snug supports at the overhangs. I am working on making a stackable version to print more at a time. PLA and PETG work but can break easily if used…
This is a replacement propeller and peg for the Kosmos Easy Elektro Construction Kit. I have created three versions of the peg with different hole diameter. The 2.3mm version worked perfectly for me, as it needs to be a tight fit on the…
🇬🇧 English I designed this model to mount this heatsink onto the Constructionzone CZ1 print head. You can either purchase this specific heatsink or check the website to see if your existing one has the same dimensions. 🇩🇪 Deutsch Ich habe…
My thought process was to create a historic memorial for the reconstruction era, post-Civil War. The first thing I had to do was scale the handshake model MUCH smaller, which I used Tinkercad to accomplish. I then cut a hold in the hand…
Just a very simple construction toy based on an 80s computer. The design is inspired by the IBM 5150. I'm goint to be adding a monitor and keyboard at some point.
Version 3 Neu: Höhe 50mm - kompatibel mit Boxen Höhe 100 mm / 150 mm / gleiche Verbinder New: Height 50mm - compatible with boxes height 100 mm / 150 mm / same connectors…
Ceci sont des rectangle qui s'emboitent ressemblant au lego. Il sont petit et facile a transporter pour pouvoir faire des construction partout.
Ceci sont des rectangle qui s'emboitent. Il sont petit et facile a transporter pour pouvoir faire des construction parto
various tools for terrace construction: 145 mm wide borehole template, wall spacer for use between wall and terrace boards and an extension for the borehole template for aligning the new holes and previous holes.
BAMBUILDI Modular Bamboo Stick Construction Play Set A good friend of mine asked if I could print her some bamboo sticks to make a miniature trophy for a bamboo building contest out of. I liked the idea, plus I wanted to see if I could…
Printed on Prusa mini+ at 0.1 Layer height, 15% infill with color swaps set up in prusa slicer. Black is Prusament galaxy black PLA Silver is Mika3d Silk silver PLA Orange was gifted so I don't have the filament info.
The construction fence fits nicely with my other Bruder fences/toys. This version is single sided and can be paused for a specific layer to do a manual color-change. I will try to create a double sided version soon for XL, MMU and other…
The Pallet does fit the Bruder Forklift and my construction fences. https://www.printables.com/model/504585-construction-fence the model is big enough to carry 8 fences.
¼" drive socket for Cardboard Construction Tools Set's screws. You can use this with a ¼" ratchet, or if you have a ¼" to hex adapter you could use it with a cordless drill or an electric screwdriver like the Bosch Go or Dremel HSES-01 .…
I can't get a construction pencil to stay behind my ear so I used to jam it between my hat and skull but that had inconsistent staying power. Consequently, I drew this clip up years ago on paper and now having a printer decided to convert…
Slim case for troika construction pen. You will need three round 3mm x 6mm magnets.
Keychain with the Construction Simulator logo. Print Settings: Perimeters: 2 Nozzle: 0.4 mm Layer height: 0.16 or 0.20mm
This Remix of the SBK Screwdriver Holder replaces the magnet mount with a tapered hole that accommodates most common construction screws; including Drywall, Chipboard, Woodworking, Metal self tapping, drywall anchors and Concrete Screws…
This is a custom chess board design that allows it to all be printed in modular pieces for easy construction for most any size printer. The chess board squares are all 2"x2" and the base they all set into adds about 1" on all sides. Each…
Boat construction - insulator for installation in long range antenna wires and stages that are used as an antenna. Cable holder - Insulator for long-distance antenna wires backstay diameter 12mm - Amateur radio service backstay diameter…
Metriccano is not only a good toy, but it puts the “rapid” back in “rapid prototyping.” There is a library of parts based on 10mm centres that can be fastened together with ordinary M3 screws and nuts. While it looks like a construction…
I needed a brick man model for stop motion video, but could not find one that would not fall apart at the slightest bump. So I started from scratch and designed one that will stay togeather. I have two trays .. one for most of the parts…
This is a construction set for building polyhedra and other surfaces. Each piece is a flat polyhedron that can join to any other piece along each edge. Obviously you can print pieces as needed, but I recommend as a starter set: 40…
This is a mechanical part of a light I was asked to remodel and repair
A model I once made of a construction piece, maybe it may be useful to someone.
I don't think this needs any explanation. A simple construction barrel desk storage container that has 4 sliding trays that lock together using dovetail. I have saved the parts in the order they fit. So for example A goes on top of the…
The spacer is designed to hold plastic sheeting in Swedoor door flex frames during construction. Keeps rooms dust-free, easy to install, and reusable without damaging the frame.
During our construction work the laser tripod of my craftsmen broke. The Slider was a little bit tiny built, therefore I was not so much surprised about that. I felt something responsible for that, so I created this part from scratch to…
The printed parts consist of 10 cuboctahedron shaped "hubs", four of each length "link", one box bottom, one box top, and 4 screw retainers. For hardware you will need 144 M5x0.8x 9.5mm heat set inserts, 40-50 M5x0.8 15mm BHCSs, a small…
I remixed the original model, to fit on a headband using a zip tie. If you have any suggestions just tell me.
Create your own Easter egg, mix colors, add layers and share the results.
I wanted a miniature construction cone that can stack with others. I actually use these when one of my cats pukes as a caution sign for anyone else in the house to avoid until it can be wet vacuumed and fully cleaned. For different layer…
I wanted to make a bunch of pinwheels as a kids craft. I didn't want to use an actual push pin for the pinwheel hub, and I didn't want to print the entire pinwheel. I wasn't able to find what I wanted so I designed it myself! The hub is…
Englisch: Guide rail for the multiplex plates, for the construction of my pinball machine. I wanted to be able to remove the plates at any time if I needed to make changes to the electronics or add something else. This is the perfect…
This equipment set is designed to upgrade your Dummy 13 figures into construction workers. Included in the set: Bricks (unbroken & broken) Wheelbarrow Spatula Construction helmet (with & without light) The link for the helmet All parts…
This 3D printable construction set is designed to help visualize and understand basic 3D geometric shapes. Ideal for classrooms or at-home learning, it supports the development of spatial reasoning, logical thinking, and creativity. The…
Why hire spongy humans when you can get one of these rugged little robots will do the same job for pennies on the dollar. No complaining about lunch breaks, and absolutely no benefits! A great figure for dioramas. Ive included a split…
This trapezoidal truss design has the interesting property that if you join the segments end to corresponding end, you get a curved arch, but if you join opposite ends, you get a straight section. This lets you build a variety of curved…
Our John Deere loader has shims for the bucket. I took measurements and designed new shims on FreeCad to replace the worn or missing shims. I printed these in ABS to see how they would fare with the sand I scoop. The original ones I…
During our construction work the laser tripod of my craftsmen broke. The Slider was a little bit tiny built, therefore I was not so much surprised about that. I felt something responsible for that, so I created this part from scratch to…
This is an easy magnetic clamp for (my) construction lamp or other thinks with a sheet metal of 2 mm thickness. The magnets are hidden in the print, which means the print needs to stop a certain point and the magnets need to be inserted…
A simple, minimal, geometric construction vehicle front for Ikea's LILLABO toy vehicles. Instructions Print the piece as oriented with pegs (a model without pegs has been provided if you already have some from other printings) Attach the…
it's a sign trailer you need 3 rods and 4 wheels, everything else you only need one
This is a model grader of my own design. The parts do move however i am still in the process of finding a way to lock the control piston. the model measures 266mm long by 114mm wide by 127mm tall. Have fun and try whatever color scheme…
Note: Depending on the accuracy of your printer, the rods may not fit properly. Therefore, before printing the final-length parts, run a test and adjust their dimensions accordingly.
