Modular Pool Noodle Construction Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn inexpensive pool noodles into an unlimited building system!
- Ocena
- 0 / 5
- Polubienia
- 890
- Pobrania
- 426
- Wydruki
- 0
- Wyświetlenia
- 11 924
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This modular connector set transforms ordinary pool noodles into large, lightweight structures for play, sports and outdoor activities.
The threaded profile provides a secure friction fit while remaining easy to assemble and disassemble. All connectors are designed for easy, support-free 3D printing.
Print settings
Material: PETG (preferred over PLA for its flexibility and better resistance to sun and heat)
Walls: 4–5 perimeters plus solid top and bottom layers for a strong shell
Infill: 25% cubic for strong parts
Supports: none required
Choosing your files
Each connector comes in a few variants so you can pick what suits your printer and your use case:
Full versions print the complete connector.
Flat-bottom versions have one side cut off so the part sits directly on the build plate and prints cleanly without supports.
"With Fillets" versions have rounded, smoothed edges. Recommended if kids will be handling the parts, as they remove the sharper corners on the threads.
Mix and match freely, every combination works with the same noodles.
Please note: Designed for pool noodles with a 22 mm inner diameter. Let me know if you need other hole diameters.
Have fun printing.
Update 1: Added new 45° and 60° 3-Way Fitting
Update 2: Added new 30°, 45° and 60° Elbow-Fittings
Update 3: Updated existing Cross-Fitting, Y-Fitting and added new 5-Way Fitting
Update 4: Updated all 3D Files to include a Version with Fillets around the thread and the top of the screw