V1 - Power strip desk mount (no screws)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to hang a power strip facing downwards from the edge of a desk (against a wall). .f3d has parameters to edit.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
NOTE: V2 available here
This screwless power strip mount is designed to hang a power strip facing downwards from the edge of a desk. It is recommended to have the back against a wall to ensure it doesn't fall off the desk.
The .f3d file provided below includes parameters that you can edit to customize the mount to fit your needs.
My version used a desk thickness of 30mm, and a power strip cross section of 58mm x 30mm (if that matches your setup, you can use the stl file provided), but if your setup is different, open the .f3d file in Fusion 360 and customize the parameters to fit your needs.