P
Printables
Funko Pop Regal für "tesa Powerstrips"
Ein Regal für verpackte Funko Pop-Figuren. Die Rückseite wurde bearbeitet, um so "tesa Powerstrips" anzubringen.
Wyniki wyszukiwania: powerstrip
Liczymy pasujące modele…
P
Printables
Universal powerstrip Mount with zip ties / Support de multiprise universel avec serre cables
[English] Universal power strip bracket (for wall or under-desk mounting). Secures with 4 screws, then tightens the power strip with two zip ties. Compatible with all power strips, regardless of size. [Francais] Support de multiprise…
P
Printables
Hook for Tesa Powerstrips
Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year
P
Printables
Nanoleaf Skylight Powerstrip Adapter
This adapter can be used to avoid drilling four holes per panel into your ceiling. Print four of them, modify the base to your needs, print and just click them into your Skylight. Prusas Textured Powder-coated Steel Sheet or similar…
P
Printables
IKEA KOPPLA Powerstrip Holder / Bracket
A wall, or under desk mounting option for your IKEA KOPPLA powerstrip.
P
Printables
Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
P
Printables
Powerstrip mounting plate
Power strip mounting systems are horrible and a pain to use. In my case, the keyholes weren't even cut correctly so it was impossible for screws to move to the top of the keyhole. It's clear that the people who made mine don't even…
P
Printables
Mount for Powerstrip
Printed with PLA and a Layer Height of 0.12mm. Infill of 30%. No supports needed.
P
Printables
Vertical holder for Ikea Koppla powerstrip + USB extension cord
0.2 mm layer height, printed on PETG with supports
P
Printables
Tesa Hook (Powerstripes)
My wife needed a hook, that was easily removeable again, for our Christmas decoration and since I couldn't find any useful design I just quickly made my own. Nothing special, quick and easy print, designed to be used with Tesa…
P
Printables
Powerstrip tidy
I thought that my power board looked untidy, so I designed this box for it to sit in. The clip shows yellow pyramids which represent plugs in a 4 way powerboard underneath shown for illustration only. Note that this design requires the…
P
Printables
Cable Clip for Tesa PowerStrips Small
This is a cable clip inspired by https://www.prusaprinters.org/prints/109563-cable-clip-2022 but for TesaPowerStrips Small. I also changed the widths of the entire clip throughout to 2mm to optimize the print process and have consecutive…
P
Printables
Double Clip Cable Tie - Powerstrip Holder for Multiboard ("Underware" Cable Management System by HandsOnKatie)
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
P
Printables
Powerstrip mounting solution - Power strip holder - Steckdosenleiste Halterung
Power Strip Holder (Extension Cord) - Universal for Any Surface Our universal holder for power strips is designed to provide you with a practical and effective solution for placing your electrical strip on any surface. With this holder,…
P
Printables
Funko Pop Regal für "tesa Powerstrips"
Ein Regal für verpackte Funko Pop-Figuren. Die Rückseite wurde bearbeitet, um so "tesa Powerstrips" anzubringen.
P
Printables
Powerstrip holder mount
I liked the power strip support, but had not enough space on the sides. so i just rearanged the holders to be screwed in front and back. i printed it with minmal support, just to make sure it comes out great. you can also print it without…
P
Printables
Powerstrip screw wall mount (vertical)
I was looking for a mount that fits my powerstrip, but most are made for ones with a bigger crosssection. Thi one fits powerstrips with the following dimensions: Width (back side/opposite of the plug ): 42 - 42.5 mm Width (at the rounded…
P
Printables
Brennenstuhl Premium-Line powerstrip mounting bracket
3D Printed Mount for Brennenstuhl Power Strips : This mount is designed to securely attach Brennenstuhl power strips to flat surfaces, such as walls or desks. It's a practical solution to keep power strips organized and out of the way,…
P
Printables
Dyson motor head holder (Tesa powerstrips, no screws)
A wall holder for Dyson gen5detect motor heads that can be mounted on walls using 6cm Tesa powerstrips. The strips I'm using should support up to 2kg, which is more than enough even for the heavy motor head.
P
Printables
Base plate/platelet for Tesa powerstrip hooks
Printed on a Prusa-Mini+ in (Prusament-) PETG with 30% infill, with 4 perimeters and 0,1mm layer height. Brim was used but is maybe optional. With the above settings printing takes 11 min on a Prusa Mini+.
P
Printables
small tesa powerstrips hook
Use tesa powerstrips small to stick it to he wall: https://www.tesa.com/en/consumer/tesa-powerstrips-small.html I printed it in PETG with supports and 0.2 mm layer height.
P
Printables
Brennenstuhl 360-2 Powerstrip Feet
This specific powerstrip is particularly prone to tipping over, because it has a round underside with two small “feet” for screw mounting. These printable feet are mounted to the powerstrip using the wall mount screw holes. They prevent…
P
Printables
Multiconnect Powerstrip keyhole
Mount a powerstrip with the keyholes to multiconnect. Multiconnect cutout is open so that it can be flexible to mounting locations of the multiconnector. I put the printed part on to the powerstrip first then slide it onto the…
P
Printables
3 piece mount for 4ft powerstrip
3 piece mount for 4ft powerstrip, printed in PLA+ print at 100% infill or with enough walls to make solid
P
Printables
Xiaomi / Atuman TH1 Thermohygrometer - wallmount - Powerstrip
This is a simple wallmount for the Xiaomi/Atuman TH1 Clock/Thermohygrometer. Just carefully remove the folding stand. The mount is designed to fit a standart Tesa powerstrip. Now the TH1 is easy to remove in case of changing settings or…
P
Printables
PowerStrip-Screw-Clamp for OpenGrid
Needed something to hold two power supplies so used the one closest to the dimensions I needed. I moved the screw tap to be centered, removed one of the multiconnect slots and lowered from 100 mm to 55 mm. I had a comment that the screw…
P
Printables
Sojag Genova Gazebo Leg Powerstrip Wire Clip
I wanted to put a power strip tucked up inside my Sojag Genova gazebo to power lights and a Sonos speaker but didn't want the cord just danging. I printed it out of PETG at a .2 layer height. 4 perimeters, 5 tops and bottoms and 40%…
P
Printables
Simple Hook. Strong, use with Tesa Powerstrip.
This is a very simple hook that holds up to 5kg without breaking a sweat. Print with any layer height, though the more infill the better. Attach it to the wall with a Tesa Powerstrip. Make sure the Powerstrip tab sticks out at the bottom…
P
Printables
Vertical powerstrip holder
To hang a power strip vertically on the wall. I prefer printing it with 3 wall loops so that the walls get solid.
P
Printables
Kleines Regal zum Kleben mit Powerstrips/ Small shelf for sticking with Powerstrips
Ein Regal, das mit einem Powerstrip Large (2 kg Tragkraft) an die Rückwand eines Schrankes geklebt wird. Die Lasche des Strips steht über, sodass er sich einfach wieder entfernen lässt (siehe Foto). Die Abmessungen der Ablagen betragen…
P
Printables
common eu powerstrip holder - bottom side mount
mount side with whole holes first, then mark where the screws should be for half holes, dont forget to pass the cord through the slot, and use washers to avoid spliting layers, 4 walls recommended
P
Printables
Curtain Holdback for Powerstrip
This is a simple small tie-back hook for thin or small curtains. And for other uses as well. It is designed to be used with a 2×5 cm Powerstrip. There is a small clearing that allows you to pull the strip out using a pair of pincers. If…
P
Printables
Universal Hook for Powerstrip
This is a simple hook for towels, etc. It comes in two sizes, small for 14×32 mm, and large for 20×50 mm Powerstrip. If you like this design, please consider leaving a ♥heart. Thanks!
P
Printables
Powerstrip Glue Nail
This Glueable Nail is inspired by the “tesa Klebenagel”. You may glue it with any adhesive of your choice. The uploaded STL is designed to go with the “tesa Powerstrips SMALL”. The V2 files are slightly reduced in size to cover only the…
P
Printables
Powerstrip bedholder IKEA
Powerstrip holder for a ikea bed headboard 76mm thick. The other side fits perfectly for a Europe standard powerstrip.
P
Printables
Slide mount for 9 socket extension powerstrip
Slide mounting blocks for Minkels extension powerstrips. One block is 6cm and I've used 2 blocks for a 44cm powerstrip. Print the model standing up to avoid using supports. Added v2 with 3mm screw hole in the middle of the design.
P
Printables
Picture hanger (low profile, powerstrips, 3 variants)
Update: Added even lower profile version Update 2: Added a version for 2 Power Strips with a stronger hook
P
Printables
Skadis - Pro-Max Powerstrip
The hooks should be glued in, so you can change the location of the clip on the power strip. For the dutch people: These strips can be fount at de Action.
P
Printables
Slim coat hook for use with Tesa Powerstrips
Looking for some small or slim hooks I came to the conclusion, that all those hooks offered by Tesa itself were not as slim nor as elegant as I'd expect. So a made my own. It's less then 15 mm thick and can still carry most clothes as…
P
Printables
Hook for Tesa Powerstrips
Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year!
P
Printables
Minimal PowerStrip Holder Click-Mount multiboard
Simple connector with Ziptie (One or Two) Print as usual
P
Printables
Hook for tesa powerstrips Wallpaper & Plaster (1 kg)
The existing models didn't matched my tesa powerstrips for Wallpaper & Plaster (1 kg). So I remixed the model of @InSL to have an appropriate model for my longer powerstrips. Depth: 2.0 mm Length: 67.0 mm Width: 20.5 mm For printing: use…
P
Printables
Pegboard Compatible Powerstrip Holder
I made this for a specific power strip from Harbor Freight (national chain of hardware stores selling cheap (read crappy) hardwares). It works for other small power strips I have. I made it to bolt my power strip to pegboard but you can…
P
Printables
Cheap Powerstrip Mount/Holder
Generic powerstrip mount, designed to be mounted "flat" in order to not increase overall height as much as possible.
P
Printables
Powerstrip holder
A Solution for mounting your powerstrip under your desk. Best printed at a 45-degree angle.
P
Printables
Adjustable powerstrip holder
Eletrical powerstrip adjustable holder. Can be used under desk, or as wall mount. Either use double sided tape or screws. Minimum width is 52mm. Maximum is 95mm. 5 Main versions: 42mm height 42mm height with extra space 47mm height 47mm…
P
Printables
Threaded Skadis wall mount for Tesa powerstrips
To simplify the installation, I designed this part to attach directly to the IKEA Skådis board using integrated threads and caps — no additional screws or hardware required. Just apply a Tesa Powerstrip to the printed part and mount it in…
P
Printables
Powerstrip holder wall mount, under desk
Eletrical powerstrip holder. Can be used under desk, or as wall mount. Either use double sided tape or screws. 3 Main versions: Horizontal wall / cabinet mount: If you'd like to attach it to a wall or cabinet but keep the outlets on top /…
P
Printables
Tesa Powerstrip Base Small
Almost a 1:1 Copy of the Powerstrip Small Base, with small improvements for printability. Printed in PLA, with 30% Infill, 0.1mm layer height, 4 perimeters, 4 top and bottom layers (which makes it pretty much solid). Obviously has to be…
P
Printables
Small Shelf for small prints - Tesa Powerstrips
This is a small shelf for you prints. It is desinged to be mounted by two Tesa Powerstrips ( https://www.tesa.com/en/consumer/tesa-powerstrips-large.html ). For one complete shelf, print 1x the shelf file and 2x the mount file. Category:…
P
Printables
Powerstrip mounting bracket
Powerstrip mounting bracket, designed for 25 mm thick workbenches. At least two prints per power strip required, as well as two zipties. Onshape link Use as inspiration, print at your own risk. In case of questions feel free to reach out.
P
Printables
Universal powerstrip Mount with zip ties / Support de multiprise universel avec serre cables
[English] Universal power strip bracket (for wall or under-desk mounting). Secures with 4 screws, then tightens the power strip with two zip ties. Compatible with all power strips, regardless of size. [Francais] Support de multiprise…
P
Printables
A hook, fitting for Tesa Powerstrips
I love TESA Powerstrips. Easy to mount, Easy to remove. And strong. And needed removable hooks. So i designed this one. Easy hook. Print with 100% infill. I printed with PETG. Useful now in household and mobile home. Even for short time…
P
Printables
Holder for Powerstrip
Just print the model sand to create a better bonding surface then glue.
P
Printables
Ikea TIMMERFLOTTE Holder for use with Tesa Powerstrips
Ich habe diesen Remix erstellt, um die Aussparung für das Klebeband zu entfernen. In der ursprünglichen Version war diese zu tief für einen druckaktivierten Tesa Powerstrip, sodass das Band keinen optimalen Kontakt zur Wand hatte. Ohne…
P
Printables
GE Powerstrip Holder, openGrid Compatible
This is an OpenGrid-compatible set of models that are used to attach a GE powerstrip to your openGrid board. Please note that the snaps used are directional snaps. Recommended Print Settings: Material: PLA or PETG Layer Height: Any…
P
Printables
Kederrail powerstripholder
for ur camper so ur powerstrip doesnt lays on the ground for the kederrail i used this model https://www.printables.com/model/515962-keder-hook-6mm?lang=de it can be printed without support
P
Printables
Wall-Mountable Soap Dish (for Tesa PowerStrip S)
We have a very small Guest bathroom with no proper place to put the soap. So I designed this soap dish. It mounts to any flat wall using two Tesa PowerStrip Small Double-sided adhesion strips. Since the strips are slightly longer than the…
P
Printables
Wall mounted storage box for Tesa Powerstrips
The Storage Box needs 2 Wallmounts. Hits Storage Box is designed for 2 "Tesa Powerstrips" large (2kg)
P
Printables
Tesa PowerStrip hooks | Haken
PowerStrip wie Tesa PowerStrip in super klein und mittelgroß Update 21.05.2023: PowerStrip_spezial hinzugefügt Update 29.05.2023: PowerStrip_universal hinzugefügt…
P
Printables
Towel holder for Tesa Powerstrips
Towel holder needs: Aluminium Square Tube 15mm x 15mm (tested up to 1 m recomended 0.5m) and 2x Tesa Powerstrips for 2kg
P
Printables
Powerstrip Outlet Bracket
Functional Bracket for 1.5"x1.5" for Prime Wire & Cable PB800012 12-Outlet 4-Foot Metal Power Strip with 6-Foot Cord, Black https://www.amazon.com/gp/product/B0027D3LNG/ How I Designed This 3D Builder Tricks Created an outer cube…
P
Printables
Powerstrip holder bracket
For my sons first year of college he was in the dorms. He needed various power strips and we wanted to securely mount them to his desk, but we couldn't drill holes or anything to the desk. We could have simply double sided taped them to…
P
Printables
LIDL Smarthome Powerstrip Holder for IKEA Skadis
First Model i made for my Skadis. Simply 2 "Rings" which can hold the Powerstrip. Printed with Sunlu PLA+ at 15% Infill.
P
Printables
Hama Powerstrip L-bracket desk mount
I recently bought a new 6-plug powerstrip by Hama (model number 00137239) for my desk. While a fantastic powerstrip (gotta love 90° sockets instead of 45!), having it on my desk was pretty messy. Mounting it flat against the underside of…
P
Printables
Hook for Tesa Powerstrips V2
Description here is my updated versions of my “Hook”: HookV2 :-) It works together with Tesa® Powerstrips® Large, 5.0 x 2.0 cm. I added two holes as a backup ;-) Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
P
Printables
Hook for Wenko racks using Tesa Powerstrips
The adhesive pads that came with our Wenko rack did not reliably stick to the surface it was glued on, so I made this hook to use it with Tesa Powerstrips. This worked better on the particular surface but also not reliable. Maybe this…
P
Printables
EU powerstrip wall mount bracket
Wall mount bracket for EU powerstrip. Designed for powerstrips with dimensions shown in the attached image.
P
Printables
Wall hook / Wall hanger (Powerstrips)
Print the model on the side with supports for optimal result and strength.
P
Printables
Honeycomb storage wall connector for tesa powerstrip
i have modified the insert-hollow-dual model so that i can attach the wall with tesa powerstrips. the holes have a back of 1mm and the tube is 0.75 mm longer so that the inserts rest directly on the wall
P
Printables
Powerstrip holder mount
I adjusted the wall thickness from JBs model to 3 mm (that is strong enough), the height to 41 mm to fit my power strips and also optimized it for better 3D printing. If you want to remix the model, please take the original one from JB.
P
Printables
Powerstrip holder clip - Mehrfachsteckdose
Simple clip-on powerstrip holder. Fast and easy to print, use a single 3 or 4mm screw for mounting. Fits most of the "EU Schuko Mehrfachsteckdosen", even the new design from Hornbach. Files: standard-Version = tight fit; powerclip_l =…
P
Printables
Powerstrip holder
EU Powerstrip holder for shelving unit (Stellingkast for my fellow Dutchies). The hooks are printed separately to ensure both proper strength for the small hook tabs, and the best possible alignment by glueing them in place for your…
P
Printables
Powerstrip mounting brackets | GER - type
Other power strip brackets were not sturdy enough or did not fit my used powerstrip, so I made one myself. Its useable with the typical power strips available in Germany.
P
Printables
Basecap Snapback Holder with Powerstrips
Since my baseball cap collection was getting bigger and unattractively stacked on the shelf, I was looking for a holder for the caps. Since I didn't like the holders I could find - only a hook on which the cap then starts sagging or the…
P
Printables
PowerStrip Holder IKEA KOPPLA for SKADIS
Dimensions had to be adjusted from the original model to fit the Koppla size. Printed at 50% infill in PLA.
P
Printables
Powerstrip bracket
A small and minimalistic bracket for mounting one of my powerstrips. Same bracket will work for both sides. Update: 22.04.2023 - Added drawing with some dimentions. The powerstrip I'm using is a little bit ‘fat around the belly’ 🤭The…
P
Printables
Small hook for Tesa powerstrips
Long time ago I have modelled this small hook for hanging small things at places where I can use the Tesa power strips. I used them frequently in my home. print this in any favourable colour or material like PLA or PETG
P
Printables
Europe Powerstrip brackets
Two brackets to mount a EU powerstrip (KF-FB-03K) to the underside of a table/desk with the help of a couple of screws. Since I had a hard time figuring out how big other brackets online are, here's some dimensions of my powerstrip for…
P
Printables
reinforced wall hook | tesa powerstrip
a reinforced wall hook for heavy picture frames. It uses 2 tesa powerstrips.
P
Printables
Logitech C270 Kamerahalterung für Tesa Powerstrips / Logitech C270 Camera Mount for Tesa Powerstrips
Sehr einfache Halterung für die Logitech C270 Webcam passend für Tesa Powerstrips Large 2cm x 5cm. M3 Schraube & Einschmelzgewinde.…
P
Printables
Snapback cap hook for tesa Powerstrips Small
Nozzle: 0,4 Layer: 0,2 Infill: 15 to 25% should be sufficient No supports needed, if you print it on the side.
P
Printables
HSW Wall Mount Tesa Powerstrips/double-sided tape
Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well,…
P
Printables
PictureHook Powerstrip Reinforced
Hook Like Tesa Powerstrips. Reinforced to avoid bending Print Settings Printer Brand: Creality Printer: LD-002R Rafts: No Supports: No Resolution: 25 Infill: 100 Filament: eSUN Resin grey Category: Replacement Parts
P
Printables
Brennstuhl ecoline powerstrip Wallmount
Be aware that some models differs from the one I bought, especially the size of the cable attachement. Check that before printing pls.
P
Printables
Mehrfachsteckdosenleiste Halterung PowerStrip Holder
An easy to print holder for most of the cheap 220V power strip . as they comes without fixing holes... Here my solution , and need only some 12 gramms of Material ! and 4 screws diam 3mm No support Infill: minimal 15% better 20% or 25%…
P
Printables
Skadis Tesa Powerstrips Tape Wall Mount (no screws, parametric)
Attach your Ikea Skadis to walls or furniture without having to drill holes. You can use Tesa Powerstrips tape or any kind of alternative adhesive tape for the same purpose. Warning! Please use the appropriate tape and for the appropriate…
P
Printables
Door Stop Catch / Window Holder for Tesa Powerstrips
Door catch & stopper / window holder with firm fit and good grip to hold the door or window open. It is easy to attach because both sides match the size of a Tesa Powerstrip: one for the window frame and one for the wall or skirting…
P
Printables
Tesa Powerstrips Large / Small mount for Honeycomb Storage Wall
Fit snuggly into the standard mounting hardware. Tipp for Printing: - Print the vertical ones on their side, such that the cut hexagon lays flat on the printing bet - Print the horizontal one on its flat face - I used three layers on top,…