1 / 6
Customizable 10 Inch Rack Powerstrip Mount — zdjęcie 1
1 / 6

Customizable 10 Inch Rack Powerstrip Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

There aren't many options for 10-inch rack-mountable power strips, so just print one!

Ocena
0 / 5
Polubienia
12
Pobrania
28
Wydruki
0
Wyświetlenia
215
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

There aren't many options for 10-inch rack-mountable power strips, and the ones that do exist are often heavily overpriced. To solve this for my own homelab, I created this fully customizable generator so you can easily mount almost any standard, cheap, off-the-shelf power strip right into your rack!

 Features

  • Fully Customizable Dimensions: Precisely fit your specific power strip by adjusting the Length (X), Width (Y), and Depth (Z).

  • Adjustable Rack Units: Choose your exact required U-height, including half-height options (e.g., 1U, 1.5U, 2U).

  • Rubber Band Hooks: Optional integrated hooks allow you to securely strap the power strip in place using standard rubber bands.

  • Smart Cable Routing: Add a custom cable slot cutout (configurable for Left, Right, Top, or Bottom) to neatly route your power cable out of the rack.

  • Flexible Mounting Holes: Toggle between generating all standard EIA-310 mounting holes or just the outer ones for a cleaner look.

  • Optimized for 3D Printing: Features 45° chamfers for enhanced structural strength and easy, support-free printability!

  • Advanced Tweaks: TONS of additional settings to dial in wall thickness, lip sizes, corner radiuses and more :)

 

Grab your calipers or a ruler and measure the three main dimensions of your power strip as shown in the guide below. Enter these values into the generator, and you are ready to print!

 

Enable Tree support for the top overhang!

Tagi