1 / 1
Mehrfachsteckdosenleiste Halterung PowerStrip Holder — zdjęcie 1

Mehrfachsteckdosenleiste Halterung PowerStrip Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An easy to print holder for most of the cheap 220V power strip . as they comes without fixing holes... Here a solution

Ocena
0 / 5
Polubienia
16
Pobrania
145
Wydruki
0
Wyświetlenia
557
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

An easy to print holder for most of the cheap 220V power strip . as they comes without fixing holes...
Here my solution , and need only some 12 gramms of Material !  and 4 screws diam 3mm

No support 

Infill: minimal 15% better 20% or 25% 

Wall 2 or 3 lines

PLA, ABS, PETG are suitable as you want - 

Fusion 360 File is also available, as you may have to adapt it to your needs. 
Measure the width , height, and the cablesupportoutput height (See pictures) , enter them under FX, and that s all. Export STL and print ;) 
 

Tagi