Mehrfachsteckdosenleiste Halterung PowerStrip Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print holder for most of the cheap 220V power strip . as they comes without fixing holes... Here a solution
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 145
- Makes
- 0
- Views
- 557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
An easy to print holder for most of the cheap 220V power strip . as they comes without fixing holes...
Here my solution , and need only some 12 gramms of Material ! and 4 screws diam 3mm
No support
Infill: minimal 15% better 20% or 25%
Wall 2 or 3 lines
PLA, ABS, PETG are suitable as you want -
Fusion 360 File is also available, as you may have to adapt it to your needs.
Measure the width , height, and the cablesupportoutput height (See pictures) , enter them under FX, and that s all. Export STL and print ;)