1 / 4
Carn the articulated mask
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mask
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
Thanks to DwarfDecker for the pivot design
I made a mask with confort and easy assembly in mind that still looks interesting.
i noticed you can adjust the mask with a heat gun (or hair dryer) if the side are too tight: heat the part for a few minutes then bend the part carefully
Recommanded settings
- The pivot is 100% infill and made with TPU as the piece should be flexible!
- the mask (both part) at 0% infill (need to be light weight) and the wall line count should be at least 3 for sturdiness
Default measurements
- seized for a head 21 cm high and 15.5cm wide (above eyes)
Print Settings
- Printer brand:
Anycubic
- Printer:
Vyper
- Supports:
Yes
- Resolution:
0.15
- Infill:
0
- Filament brand:
tinmory
- Filament color:
white
- Filament material:
Pla / TPU
- Notes:
the Jaw print better teeth up but for the head teeth up result in visible artefacts due to support (with no sanding)
The pivot is in TPU and with 100% infill
This desing is by Drakarmau