1 / 4
Carn the articulated mask
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mask
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 66
- Makes
- 0
- Views
- 506
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to DwarfDecker for the pivot design
I made a mask with confort and easy assembly in mind that still looks interesting.
i noticed you can adjust the mask with a heat gun (or hair dryer) if the side are too tight: heat the part for a few minutes then bend the part carefully
Recommanded settings
- The pivot is 100% infill and made with TPU as the piece should be flexible!
- the mask (both part) at 0% infill (need to be light weight) and the wall line count should be at least 3 for sturdiness
Default measurements
- seized for a head 21 cm high and 15.5cm wide (above eyes)
Print Settings
- Printer brand:
Anycubic
- Printer:
Vyper
- Supports:
Yes
- Resolution:
0.15
- Infill:
0
- Filament brand:
tinmory
- Filament color:
white
- Filament material:
Pla / TPU
- Notes:
the Jaw print better teeth up but for the head teeth up result in visible artefacts due to support (with no sanding)
The pivot is in TPU and with 100% infill
This desing is by Drakarmau