1 / 2
Multiboard Pen Mount — zdjęcie 1
1 / 2

Multiboard Pen Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Push-fit pen mounts for a Multiboard wall.

Ocena
5 / 5
Polubienia
63
Pobrania
440
Wydruki
5
Wyświetlenia
1113
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are pen mounts for a Multiboard wall.  The holes have a diameter of 10.2mm, 12.2mm, and 14.2mm and the outside diameter is 18mm.  The larger one (14mm) is large enough to fit many of the simple deburring tools.

The model is push fit with a tight tolerance designed for my board.  If the fit is too loose or too tight, you an try scaling the model.  Alternately I'm happy to generate models with slightly different tolerances.  Don't hesitate to contact me.

The model was designed to be printed with supports enabled for the push pin.  You only need to set the overhang threshold to something like like 5%.

Tagi