1 / 2
Qidi X3 Series XMax3 Mounting adapter for Mellow LLL Filament Buffer — zdjęcie 1
1 / 2

Qidi X3 Series XMax3 Mounting adapter for Mellow LLL Filament Buffer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adapter plate mounts the Mellow LLL Filament Buffer to the original location of the Qidi filament detection device.

Ocena
0 / 5
Polubienia
6
Pobrania
18
Wydruki
0
Wyświetlenia
250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

 

Qidi has such a long filament path and the drag affects print quality sometimes. Thatswhy I decided to use a filament buffer device.

 

 

I print ABS but you're good to go with PLA or other shit you have laying around.

Very simple CAD model but functional and works.

 

Use 2 M3 heat inserts and some standard M3 bolts or just screw it in with self cutting threads in case this is what you"ve got in your shop.

 

Use 4 original screws from the Qidi filament detector. There too long but it doesnt matter in this case.

 

 

Use 4 Pin original cable and connect GND, + and Signal.

GND is doubled on the plug. Both Pins in the middle are GND. Use multimeter to find + !

 

Enjoy!

 

 

 

https://mellow.klipper.cn/en/docs/ProductDoc/ExtensionBoard/fly-buffer/?persistLocale=true

 

Model Download Link

Buffer Model

Configuration Reference

[filament_switch_sensor Filament Runout Detection]
pause_on_runout: true
switch_pin: ^PG7
runout_gcode:
        PAUSE
        M118 Filament Out
insert_gcode:
        M118 Loading Filament

 

Wiring Reference

Installation Diagram

https://cdn.mellow.klipper.cn/SCH-PDF/buffer.pdf