Qidi X3 Series XMax3 Mounting adapter for Mellow LLL Filament Buffer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter plate mounts the Mellow LLL Filament Buffer to the original location of the Qidi filament detection device.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 18
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Qidi has such a long filament path and the drag affects print quality sometimes. Thatswhy I decided to use a filament buffer device.
I print ABS but you're good to go with PLA or other shit you have laying around.
Very simple CAD model but functional and works.
Use 2 M3 heat inserts and some standard M3 bolts or just screw it in with self cutting threads in case this is what you"ve got in your shop.
Use 4 original screws from the Qidi filament detector. There too long but it doesnt matter in this case.
Use 4 Pin original cable and connect GND, + and Signal.
GND is doubled on the plug. Both Pins in the middle are GND. Use multimeter to find + !
Enjoy!
https://mellow.klipper.cn/en/docs/ProductDoc/ExtensionBoard/fly-buffer/?persistLocale=true
[filament_switch_sensor Filament Runout Detection]
pause_on_runout: true
switch_pin: ^PG7
runout_gcode:
PAUSE
M118 Filament Out
insert_gcode:
M118 Loading Filament
https://cdn.mellow.klipper.cn/SCH-PDF/buffer.pdf