Pet drink flask holder (držák pítka)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable and strong flask holder for 1L drink bottle to the cage. Stabilní a pevný držák 1L pítka pro uchycení ke kleci.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Stable and strong flask holder for drink bottle to the cage.
Stabilní a pevný držák pítka pro uchycení ke kleci.
Can be printed from PLA, I used 40% infill.
For completing you will need 2x M5 screws (here I used imbus head, i think it is DIN 912) and two M5 nuts, that are pressed in (or just with assitance of hot pen about 190°C) are pressed in.
Good thing is that holder fits to older flask type and also new one, which have few milimeters flatened radius. Originally I have rabbit and I have cage Cassita 120cm. There are big mesh distances, so original “wire” for holding flask was very unstable.
Recommended use with : https://www.hradsky-sunk.cz/zavesna-automaticka-napajecka-1-l-pro-kraliky-bila
UPDATE : Recommended screws for manual release (if not used DIN912) : https://www.aliexpress.com/item/1005004556320635.html (please select M5 and appropriate length)