Pet drink flask holder (držák pítka)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stable and strong flask holder for 1L drink bottle to the cage. Stabilní a pevný držák 1L pítka pro uchycení ke kleci.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
Stable and strong flask holder for drink bottle to the cage.
Stabilní a pevný držák pítka pro uchycení ke kleci.
Can be printed from PLA, I used 40% infill.
For completing you will need 2x M5 screws (here I used imbus head, i think it is DIN 912) and two M5 nuts, that are pressed in (or just with assitance of hot pen about 190°C) are pressed in.
Good thing is that holder fits to older flask type and also new one, which have few milimeters flatened radius. Originally I have rabbit and I have cage Cassita 120cm. There are big mesh distances, so original “wire” for holding flask was very unstable.
Recommended use with : https://www.hradsky-sunk.cz/zavesna-automaticka-napajecka-1-l-pro-kraliky-bila
UPDATE : Recommended screws for manual release (if not used DIN912) : https://www.aliexpress.com/item/1005004556320635.html (please select M5 and appropriate length)