Xiaomi body composition scale S400 - Wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wall mount for Xiaomi body composition scale S400 made out of 2 pieces. No support needed :-)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is my wall mount for a Xiaomi Body composition scale S400 :-)
You need to print 2 pieces. The model is simetric if printed on the flat edge in the corner.
You can print it without support.
I used white Marble PLA with 4 walls and 20% infill for this print.
Tips for easy mounting:
1x bubble level
1x pencil
4x 4*25 (TX20 or other head) countersunk screws
I put everything flat on the floor and slot the 2 corner pieces with the xiaomi scale.
I then used my bubble level and and marked the spacing of the 2 support pieces on it with a pencil.
Then on the wall I could level with the bubble level and mark the holes for each piece by resting it on the bubble level.
Then I drilled and installed the screws into the markings.
Enjoy the perfect fit ! :-)