Easy print VESA wall mount for TV or monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To mount a TV to the wall. Low plastic, no support print. Hangs securely, device can be easily removed by lifting.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 644
- Wydruki
- 4
- Wyświetlenia
- 5086
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
!USE AT YOUR OWN RISK!
It works for me, and feels solid.
maybe it is worth spending 10 euros on certified solutions… But we are makers ;-)
I think it could go up to 55 inch, I would not go above 15 KG load. Make sure to use adequate wall mounting plugs.
Drill guide is included to ensure easy hole spacing and horizontal mounting.
Use 5mm/6mm wall screws.
For the TV side i used 30mm/6mm hex screws.
Print the wall parts mirrored as per slicer screenshot.
Print the parts upright to ensure strong horizontal strength when mounted.
Use the guide to drill the 4 holes, mount the parts to the wall and TV- and just hang slide the TV onto the wall brackets.
PLA works fine, print a bit hotter than normal to go for optimal adhesion. Minimum 3 walls.
Do not overtighten the screws (to avoid layer separation).
F360 source included.