Easy print VESA wall mount for TV or monitor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To mount a TV to the wall. Low plastic, no support print. Hangs securely, device can be easily removed by lifting.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 645
- Makes
- 4
- Views
- 5,089
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
!USE AT YOUR OWN RISK!
It works for me, and feels solid.
maybe it is worth spending 10 euros on certified solutions… But we are makers ;-)
I think it could go up to 55 inch, I would not go above 15 KG load. Make sure to use adequate wall mounting plugs.
Drill guide is included to ensure easy hole spacing and horizontal mounting.
Use 5mm/6mm wall screws.
For the TV side i used 30mm/6mm hex screws.
Print the wall parts mirrored as per slicer screenshot.
Print the parts upright to ensure strong horizontal strength when mounted.
Use the guide to drill the 4 holes, mount the parts to the wall and TV- and just hang slide the TV onto the wall brackets.
PLA works fine, print a bit hotter than normal to go for optimal adhesion. Minimum 3 walls.
Do not overtighten the screws (to avoid layer separation).
F360 source included.