Reversible Shotgun Ring Sights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
24mm hole "ghost ring" sights for picatinny rail suitable for shotguns at short/medium range
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 317
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Designed for a shotgun with a picatinny rail and no iron sights. The 24mm holes were picked to show the potential pellet spread after some experimentation with shells an cardboard at distances I've needed a shotgun (20-100 ft) using “turkey” loads.
These are not friction fit: they need a 35mm M3 screw and nut to handle the recoil. I've printed in PLA and PETG-CF with a smooth fit and good adjustment. Alignment holes for some paint.
Freecad file is included, and has an attached spreadsheet for some of the parameters.