Liczymy pasujące modele…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Print with a higher nozzle temp, as the handle has snapped on me during testing. This is designed for the Gen 2, not sure if it's compatible with other generations. Retains auto-deploy functionality when the rifle is unfolded. For now,…
Minimally usable “iron sights” to keep on a picatinny rail when the normal optics / sights are removed. The ghost ring and post is accurate enough for some plinking with a .22 or air rifle and stays in place with just friction. Light…
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
These are available in 1, 1.5 and 2 degree pitch options. i recommend trying 2 degrees for 70-100fps, 1.5 degrees for 100-150, 1 degree for anything above that. a 30mm raiser is included for blasters with a very flat top like the nexus…
Extremely tight fit. Will need filing. Not flip up. No adjustment. Just funny simple ironsights!
Just took the picatinny you screw on, modified it a bit, and slapped it on top of the mount. You'll probably want to use supports now. @
use piece of plastic and draw a dot with a sharpie. slide the piece of plastic in the slot on sight without built in dot
Blocky Iron Sights (combined in one piece) -- Barnacle for foam dart blasters with picatinny rail. I made these low profile, blocky style and clearly visible iron sights for my Barnacle. It's a bit of a loose fit at my Barnacle (but it's…
A Tunnel Front Sight for olimpic shooting, with a Ruger American Rimfire adapter (you can change the curvature for other muzzler) with a 12-38 insert sample.
Iron Sights -- ONTOS hardware free for the Picatinny rail Adapted my one piece iron sights so that the shape fits better to the ONTOS (original) optic rail. The files are already pre-oriented. It needs approx. 20g of filament. My print…
Clip-On Iron Sights for the Nerf N1 Agility Blaster. It just needs approx 7g of filament. To remove, press upwards with your thumb from the bottom front on one side. The files are already pre-oriented. My print settings for PLA: 0,2mm…
Iron Sights + Streamline Hammer ---> Mods for Leedle's Calypso Blaster Pin mounted iron sights and a streamlined hammer for the Calypso blaster by Leedle Dynamics. The Iron Sight pins simply replace the top two pins on the blaster. --->…
cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.
All files in print orientation Multicolor Inserts: Only for the inserts I included Transparent filament until 0.5mm Filament change at 0.5mm to the reticle color For the other parts, go to: No hardware:…
I recently broke off rear sight on my WE Glock-17 Gen.4. So I created a replica of the original to replace it.
Remix of the FS-Cover to add a sight hole for an led on the filament sensor and to add support for the extruder cooler mount. -There are two versions -One for the normal MMU2 setup and One for the MMU2 sensor with the tall stack, which is…
This Print is a replacement for the rear sight, which allows for change of color or glow in the dark night operation. Using PLA GLOW will work fine. One file is a scaled down version to 97% to make it less of a tight fit, otherwise minor…
Print with a higher nozzle temp, as the handle has snapped on me during testing. This is designed for the Gen 2, not sure if it's compatible with other generations. Retains auto-deploy functionality when the rifle is unfolded. For now,…
I took the work done by https://www.printables.com/@AJQuick and did some adaptations, This I did several years ago, but never published. The model has been on my wife car since 5+ years without any incident Since I did not wanted to use…
I took the work done by https://www.printables.com/@AJQuick and did some adaptations. This is the second adaptation I did, but feed mostly from my previous model (which I adapted from AJQuick). I needed to do a second adaptation because…
Сам печатал пластиком ABS 0,4 соплом с разглаживанием на всех верхних поверхностях, чуть подгонял по посадочному месту. Делал под оптоволокно 1.5мм, запаситесь сверлом по металлу на 1.5мм и тогда зайдет на ура. Я доп. посадил на космофен…
Scope lenscover to fit Sightron Rifle Scope front is 56.9mm rear is 41.5mm Requires 2mm elastic to attach together Test printed with prusament pteg 30% infill
New muzzle with feed ramps to make it easier for young children to load darts. Just unscrew the clamshell and swap out the original part. Prints without supports (face down) The rear sight requires the nub on the clamshell to be trimmed…
ODCON 2 blanck top slide modded part with integrated ironsight and a slight (0.8mm) increase of bottom coverage.
Check you center alignment for stance & when down on the shoot. Must see equal amount of the yellow color when up & down on the shot.
A small, friction-fit case for a .308 Winchester boresight and 6 LR41 batteries. Label is printed separately to avoid needing supports for the lid - attach with your choice of adhesive.
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
had to make this my threads were messed up when it threw a red dot and ripped the threads so i rethreaded for a largeer screw will neew sanding to fit good update first one is two narrow for the pt140 so i made some changes and widend it…
I want my Sunsight AAT-30 to be as level as possible when I start without having to get feedback from an App. Here's the Spirit Level that I used for this model. Nice and big, plus tapered on the sides so it doesn't fall out.…
Replacement sight designed after the original broke during cleaning/repair. Designed as a direct replacement since the OEM does not offer the part separately.
!!!This is not a real gun!!! Hello, Today I have for you Airsoft AK 47, AK 74 front sight. It fits perfectly in its place. The appearance is authentic. Requires M3 bolt. Modeled after the Cyma AK 041 template and photos from the internet.…
A prototype of a scope mount i have been working on for airsoft or a small caliber rifle (.22/9mm) Use high infill, 4+ walls, and a tough filament for extra durability. I use PLA+ or PET-CF for this application. Hardware that is needed to…
I can add calibers and laser diameters per request. I printed the thin part with 50 percent infill with a .07 mm layer height. ask through comment and I can have it in about a week. if you need it quicker, email me at…
The W&F diopter is mainly used for competition shooting. Most second hand sets are equipped with a ring insert but in my country this is not allowed for military rifle competitions. Original sets are expensive or unobtainable at all so I…
If you want to try out a light-conducting front sight before buying the real thing, here you go. After printing, you need to install a piece of transparent colored filament, clean it up, and adjust the height. It works, but the original…
The rear sight on my Gamo falcon was missing a bit so I made a new. This is only the housing to the sight so you have to move over the other parts from your old sight. y I printed it on a Anycubic Kobra 2 Max in PETG
SINGLE DOT FIBEROPTIC SIGHT FOR AIRSOFT GLOCKS (G19) Unique design eliminates the need for a front sight, and multiple dots. When the sight is on target the dot glows in ambient light, when off target the dot is obscured by the walls of…
Wanted to remix my SMILEY to look a little closer to the SMLE mk3 rifle and wanted functional irons, so this is the result. please note these are designed to be compatible with a 24mm outer barrel like used in the ryobicop files. I…
Front dust cap for a Trijicon MRO Reflex sight. Keeps the dust off while storing in the safe but snug enough to stay on during transport. Diameter is 40.5mm and it fits perfectly. If not, you can download the raw file and modify to your…
I designed this front sight as a replacement for a broken one on my Mendoza 5.5 caliber air rifle. The design was optimized to be printed in PETG for durability, and includes a visible green front sight tip made using a filament change…
I really liked this kit from Ghost Manta, but I wanted to be able to insert filament into the sight post to allow for easier sight acquisition. Filament is friction fit, but you can add a touch of super glue as necessary. These should…
I made this a while ago when I wanted a simple sight for a paintball gun so I didn't completely miss every shot. I find it better to add some sort of grippy thing like hot glue (or Plastidip if you have it) to make it stay on better.
pretty simple model that combines the sight and the rail option does NOT use extra hardware Posting your makes is appreciated and feel free to ask questions :)
DIN rail mounting adapter designed for Milesight industrial routers USR325 . This adapter allows secure installation of the router on standard DIN rails commonly used in electrical cabinets and industrial environments. The model has been…
Slide this adaptor into the back of your MK3 upper. You can then use Spiggytech's Glock sight pusher to press the rear sight. May work on other Ruger variants but I only have the MK3.
The adjustment tool that comes with the Glock Adjustable Rear Sight is in a non-standard size and is incredibly small, making it difficult to use. This part adapts the Glock tool to a standard-size hex-bit, allowing you to use any…
The adjustment tool that comes with the Glock Adjustable Rear Sight is in a non-standard size and is incredibly small, making it difficult to use and easy to lose! This handle fits the Glock tool allowing you to comfortably use it for…
This is a tool to tighten or loosen the sightglass on a conicus pro fermenter. recommend print using PETG at 0.20 with good infill (50% but slightly less might be enough also)
A spinoff of my switch blank, this one has a hole perfect for fitting the Kicker CXARC remote bass control knob.
My uncle sent me this file and asked me to print it but asked if i can add handles for holding them. I added the handles and that is what this is.
To put it on retaliator barrel you have to unscrew the barrel and unscrew the screw holding in the oringinal sight +Another sight for this is coming and then there will be an sight like this for the nerf stryfe and maybe a flywheel Ww2…
CZ 452 Brno Mod2 front and rear sights PLA+ and Orca Slicer's soft and adaptive variable layer height options.
M16-style picatinny mount carry handle* / rear sight with elevation adjustment. Hardware required: 1x M3 heat-set insert (4.5mm diameter x 6mm) for adjustment wheel 1x M3 x 25mm screw 2x M3 x 10mm screws (to stabilize sight when elevation…
This is a Rear Fiber Sight for the Browning 1911-380 (it should also fit the 1911-22) I found a front sight here and decided to make a rear sight to match https://www.thingiverse.com/thing:4249698
Upgrade your Nerf blaster with this front and rear sight set, designed to snap directly onto standard Nerf blaster rails. No screws, no glue, fully printed in one go. The rear ring sight and front post are designed to align naturally for…
make your nerf gun tatical grey and or silver silk filament recomended.
Elevation adjustable, fixed windage. Based on a 20" (508mm) sight radius. Would be suitable for most carbine length replicas, but probably doable for some of the shorter ones. The small ears on the side of the base help protect the sight…
MOSPAS, short for Modular Open Source Picatinny Attachment System, is a free to use modular series of 3D models, meant for creating custom 3D printed attachments for a rail integration system (RAS) such as Picatinny or NATO rails.…
The right tab (the one with the size printed) should be 4.0mm. Print one and measure that tab height, then enter the proper offset in the corresponding parameter and make the final print. For me, when printed without offset the right tab…
Sight pin for recurve bows, fits 4mm rod PETG is recommended, no support, 10 minutes quick print.
Intruduction These ironsights are remixed from the ones included with the files of the SLAB so the sight picture should be identical, if you don't count that the front sight is much further away than it would be on the rail. These were…
Hardware: Kitchen rubber band, most will work, mine have a diameter of 35mm when laid out flat M4*25 bolt and nut, one per sight This is a set of iron sights that uses a tiny rubber band to work, the sights will snap into the lowered…
Post a make if you print! I would love to see it. Picatinny sight mount dimensioned specifically for the Zinc 2.0 foam dart blaster by 118 Design, as all existing mount models were too small. Still easy to prime the blaster. Requires 1 or…
Available Front Sights did not match my expectation in size, so I designed a new one. Not much to say to this. Designed in TinkerCad, printed on my MK4 with PLA with 0.1mm LH. If suitable, I will try a harder material, but so far it works…
.STL for UV3 and UV3XL torque ring. 3mm, 4mm and 5mm cups for different sight pictures. Models for both UV3 and UV3XL Best printed in PETG Infil 100% Layer Height .10 for best results
I made this so to help with K40 mirror alignement with a Sightmark 40S&W laser boresight (https://www.amazon.com/Sightmark-380-ACP-Pistol-Boresight/dp/B001C3Q9BI ) with the Cloudray Laser Head ( https://www.amazon.com/dp/B07NXQ7SVK ).
Remix of Ruger Picatinny rail by RustyNail The cutout allows to use stock iron sights without detaching the rail I also made it about 0.8mm higher There seem to be no good orientaion for printing this on FDM printer. Best ones seem to be:…
This is a remix of the Rear Speaker Kit, Gen 1 Honda Insight by armacisaac, adding a concave speaker grille.
Gridfinity 1X3X3 filled box modified to hold the Fixit Sticks Field Pistol Sight Tool. Been working on the bench top tool kit and wanted to have these items as part of plan.
Custom grip, requires 1 toy screw to retain the grip to the front grip keeper
Parametric model for creating custom sight elevators. Attached are the files for a set of 10mm elevators I use on my Feinwerkbau 603 air rifle. Parts Printed sight elevator 2x M3x16 bolts 2x M3 threaded inserts Assembly Print the sight…
Have you recently taken the Insights test or are you providing this test to others? Then this cheat sheet will come in handy. Please see below for an 8-page printable cheat sheet
Took Orthographic photos to get dimensions nice and easy. Notes: https://makezine.com/article/digital-fabrication/3d-printing-workshop/how-to-use-blender-to-design-3d-printed-parts-that-fit-real-world-objects/ * Take pictures from far…
Prints great in PETG or PLA. If you're going to print it in TPU, 100% width is too loose on the sides. For a little bit of squeeze on the sides, reduce the with to 99% of original. The photo is of the TPU print.
Made a beautiful MS paint drawing on how it should be mounted and which orientation it should be held and fired in
I tweaked the original design: Faux shell ejection port, dotted ironsights, overall design, minimal slide play
The mod contains parts for https://www.thingiverse.com/thing:1915956 : A remix of the crossbar thumbnuts that now use M4 hex-head screws in order to achieve better grip and allow assembly/disassembly. Improved version of the scope windage…
This is a 3D printable trip odometer reset knob for Honda Insight
variant 1 - original Korsar for 1 mm fiber variant 2 - narrow for 1 mm fiber variant 3 - long and narrow for 1.5 mm fiber
A charging handle for the SSP1 which replaces the original front sight. The part is being hold in place by printing it slightly bigger (Incase the part doesn't fit, try to scale it slightly) and press fitting it into the mount. The model…
Minimally usable “iron sights” to keep on a picatinny rail when the normal optics / sights are removed. The ghost ring and post is accurate enough for some plinking with a .22 or air rifle and stays in place with just friction. Light…
The Diana Charger air pistol/rifle has very nice blade sights, but after playing around with the ghost rings on a .22, I wanted the same rear sight. The ghost ring works well with my aging eyes. The center of the hole is 13.5mm above the…
this is the blitz muzzle with a small and large iron sight option intended for use with my Faux red dot sight upper.
Designed for a shotgun with a picatinny rail and no iron sights. The 24mm holes were picked to show the potential pellet spread after some experimentation with shells an cardboard at distances I've needed a shotgun (20-100 ft) using…
![Zinc 2.0 dotted sight slide [minimized slide wobble]](https://media.printables.com/media/prints/1047086/images/7945689_8bcab319-80f4-4acc-9a2f-a28a3a91b632_4d0defd6-c0da-48f2-967d-3204dcf95f6c/screenshot-2024-10-23-042140.jpg)
