SINGLE DOT FIBER OPTIC SIGHT FOR UMAREX G19 AIRSOFT GLOCKS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SINGLE DOT FIBER OPTIC SIGHT FOR UMAREX G19 AIRSOFT GLOCKS
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SINGLE DOT FIBEROPTIC SIGHT FOR AIRSOFT GLOCKS (G19)
Unique design eliminates the need for a front sight, and multiple dots.
When the sight is on target the dot glows in ambient light, when off target the dot is obscured by the walls of the sight making it easy to distinguish when your aim is on target or not.
Print in a vertical orientation, with a brim
REQUIRED - need a piece of 0.12in fiberoptic (from amazon), OR, transparent 2.85mm filament (i used orange PETG), simply make a small flat nub on the end, giving it a "nail" shaped head, and cut it to length ( insert about 3mm of filament into the end of the tube. DO NOT FILL MORE THAN A FEW MM OF TUBE, this sight requires the vast majority of the tube to be empty. VIEW THE SCREEN SHOT TO SEE A CROSSECTION OF THE SIGHT.
1.85mm filament will NOT work with the model, and when i tried it the dot was too small for a good sight dot.
you will also need 2x M2 screws, and matching nuts, and you will have to file them down to match the required length ( about 4 mm)
RECOMENDED - print in carbon fiber filament to hide layer lines, and give it a nice matt finish, other matt filaments