SLAB fixed ironsights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixed non-picatinny iron sights for the SLAB
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 148
- Wydruki
- 3
- Wyświetlenia
- 648
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Intruduction
These ironsights are remixed from the ones included with the files of the SLAB so the sight picture should be identical, if you don't count that the front sight is much further away than it would be on the rail. These were designed after i determined that the OG sights were too wobbly for my taste.
Printing options
You should print the rear one with the back on the printbed and the front one with the front on on the printbed. They should be printed with at least 3 perimeters.
Mounting Istructions
Both sights can be screwed in with the 4-40 screws used for the rest of the blaster, but i used two M3x8 hex screws