Liczymy pasujące modele…
Simple wall shelf for displaying PSA slabs that requires no drilling Each rail is 250mm long and holds 3 PSA slabs I printed them vertically so they stayed square Mounted using 3m Command Poster Hanging Strips
Print as you would with SillyButt's SLAB parts. The only difference is for the Muzzle A piece, print with the front end on the build plate with supports to build plate only. For the Shroud go here:…
NOTE: This can be a dangerous item to assemble. You must be familiar with using Li-ion batteries safely as well as how to solder. Proceed at your own risk! Want to build your own small smoke machine for your HasLab Ghostbusters Ghost Trap…
I came up with this solution to evenly space pipes before pouring concrete. The SCAD file can be customized for any pipe size needed. File is currently setup to bond together with ¼-20 threaded rod.
Designed specifically for NG-1 and NG-2 challenge coins and secures them inside the QUICKSLAB Rectangular Coin Capsules by lighthouse.us. The coins are too large to fit into the capsules as is so I discarded the smaller half of the shell…
Really simple slab stand. printed with 3 walls at 20%infill gyroid (card stands easily but could be printed higher for more weight) slight angle to allow better tabletop view Thank you for looking!
Cheek rest that can extend 15mm higher than the original and still goes all the way down. Print and use the same as the original. Update: Added one extended by 30mm from the original as the 15mm was barely tall enough.
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the SGC…
I randomly found myself wishing that the SLAB had a ball detent system like many of SillyButts' other blasters(Not like it would be that useful, your hand keeps it closed already), but I realized that magnets are way easier. So this model…
Beckett slab bumper 50 minute print time. Print in PLA if you print please leave a review and like
This 3D‑printed model is specially designed to securely and neatly display PSA slabs. Thanks to its precise dimensions and sturdy construction, it provides a perfect fit for standard PSA slabs, preventing any shifting or damage. The…
This 3D‑printed model is designed specifically to hold PSA slabs securely and present them in the best possible way. Its precise dimensions ensure a perfect fit, allowing the PSA slab to sit neatly and firmly in place. Thanks to the…
The Slab | Colección Hexa Monolith Minimalismo sólido aplicado al orden diario The Slab es una jabonera de diseño funcional que mantiene la estética monolítica característica de la Colección Hexa Monolith. Su estructura robusta y limpia…
Designed specifically for NG-1 and NG-2 challenge coins and secures them inside the QUICKSLAB Rectangular Coin Capsules by lighthouse.us. The coins are too large to fit into the capsules as is so I discarded the smaller half of the shell…
slab-jig-front - 5.5 mm from the edge, 5 mm diameter slab-jig-back - 9 mm from the edge, 4.2 mm diameter slab-fixture-bar - for cutting bars. slab-fixture-barrel - for cutting barrels. The tolerance is pretty tight.
Dieses Model nur in TPU drucken,ca 10% Infill preis ca. 60cent,Step und Fusion Datei dabei.
These are 3d printable versions of the priming bars for the metric version of the SLAB . These were designed to fit the Ender 3 printbed (and probably a Prusa 3? If not let me know). The short one required no modification since you can…
Intruduction These ironsights are remixed from the ones included with the files of the SLAB so the sight picture should be identical, if you don't count that the front sight is much further away than it would be on the rail. These were…
As I was building my SLAB, I interpreted (incorrectly) ‘thread lock’ as ‘super glue’. Now, alas, I've got my threaded rod superglued into my RodCap, meaning it's not quite long enough to fully depress the trigger lever. The smart move, of…
Older model i never Published PLA: Fiberlogy Printer: CE 6 Program: fusion 360, made to protect the PSA slabs, print needs support, slide in carfully (slight presure fit) Enjoy, non comercial
Want to add a Slabiimov Shroud to an existing SLAB? Just use this adapter instead of reprinting your Muzzle A. I remodeled the shroud connector to be a stand alone part from the “Muzzle A” piece so you can add a shroud without taking…
Crests attached to the left arm of Hearslabyul school uniforms. Flat pin back (available online or at your local craft store) is required to attach it to a sleeve. Ribbon is not included. Print in any color/filament type and spray paint…
This box will contain 30-35 slabs of your graded trading/collectible cards depending on the grading company used and whether the slab is sleeved or not. No supports/brim/skirt required Both parts print simultaneously on a Prusa i3 style…
Modified SLAB transfer bars with captive nut and bolt so that a 3/16 rod can be used instead of a clevis pin. Use Metric M3x10 screws
A sturdy-ish stand for your graded cards! Sorry it has been a while since I uploaded. I've been busy lately.
Downhill longboard Riptide Slab inspired footstop. For best results, print in TPU. Use 15 to 16mm washers on top and bottom for mounting.
Love the Mare's Leg kit, but I miss the sling point from the official slab stock (even if a sling doesn't quite make thematic sense on a sawed-off stock). This replaces “SLABmareslegstockcore.stl” from the original file set with one that…
These are little filler plugs that cover flush with the shoulder strap holes in the motherboard of the Haslab Proton Pack. I have the waist filler plugs uploaded separately.
These are little filler plugs that cover flush with the shoulder strap holes in the motherboard of the Haslab Proton Pack. I
Storage box will fit up to 20 PSA graded slabs Front box panel has an attachable (Glued) standard size card frame to slip in a TCG card to distinguish what type of cards are stored inside. bottom of the box comes with an optional PSA…
I redesigend Silly's stock parts to enable a print orientation, in which layer lines are super smooth. 100% compatible.
I found that when I printed Silly's double-plunger SLAB parts, the turnaround collides ever so slightly with the grip, causing the grip to push outwards and friction on the action. I noticed there is a difference between this and the…
This is a remix of Sillybutt's Top Rail. I had issues with not being able to adjust the optics low enough to plink my targets. Canted it to 2° so that I have a more accurate estimate. Also included a 1° just because. Happy foam flinging!
This is a Legris Elbow that was room for a 8x2mm magnet for your proton pack.
Really simple slab stand. printed with 3 walls at 20%infill gyroid (card stands easily but could be printed higher for more weight) slight angle to allow better tabletop view Thank you for looking!
Cheek rest that can extend 15mm higher than the original and still goes all the way down. Print and use the same as the original. Update: Added one extended by 30mm from the original as the 15mm was barely tall enough.
Update 11/27/24: I rounded the top and bottom edges more as I found that they would sometimes dig into my shoulder if I shouldered it too quickly. I found that the original butt pad slid around on my shoulder too much so I made it more…
Print normally with no supports. The print slides onto the ends of the cotter pins. The bottom layer is facing outward on the rear cap and the top layer is facing outward on the front cotter pin(This is if you are using the lever pin…
Someone wanted the Text off of the Trans SLAB I made a while back NONE of my files are to be used or sold by Frontline Foam, by downloading my files, you agree that you are not Frontline Foam and/or related to Frontline Foam or Derrikk Sun.
A simple model of a cardmarket grading slab. Its only an approx. model, because I only had a video to work with. Category: Toy & Game Accessories
Fits perfectly with the oem screw with no problems! 0.2mm layer 50% grid infill Printed with PLA+ Tree support for cleaner hole Print with hole on top + You need to print 2x the normal file, + 2x mirrored. +
For years I've printed on top of paver slabs to help deaden noise and vibration harshness (NVH) caused by the inertia of Prusa printer heads on my MK3. A recent acquisition of a Prusa enclosure and a MK4 led me down a path of how to best…
This is a printable frame that you can stick your own metal mesh into for a more realistic look in the Haslab Two in the Box ghost trap. It's been designed about .5mm oversized compared to the original so that it will fit tightly in the…
This is a simple vent system that helps distribute the smoke from the Costronica Ghost Fog machine more evenly. Prints without supports and clips right in to the fog machine directly.
General idea Placing a 40x40x4 concrete slab under your 3D-printer significantly reduces noise/vibration transferred to the enclosure. Placing the slab on top of the LACK table causes reduced height needed for the printer PRUSA MK3S+ with…
Much sturdier than the PSA/CGC stand as I widened the supports on the stand.
An extremely oversized replacement for the SLAB Lever (and stock). This model attaches onto the standard split lever top piece, and uses the optional no stock models included with the SLAB files. Compatible with standard and angled Talon…
Notice : These parts are for DIY purpose, Use it at your own risk.
Print your own precision slab slicer with this 3D model file! Designed for smooth and consistent clay slicing, this tool helps create even, professional-quality slabs for pottery, polymer clay, and sculpting. Included File: high-quality…
chamfered some edges and made a larger variation to hold a larger card
Ornament Holder for a wood slab ornament. it fits a ¼" thick round slab. was inspired by our tradition to cut a chunk from out Christmas tree every year to make an ornament for that year.
A round trigger for the SLAB. Prints the same, installs the same, works the same. It just feels better in my hand. Leave any questions in the comments and happy printing!
wall display for your slabs!!!! easy to print and use. fits most single card slabs. the lock is friction based, can be hot glued if desired
John Deere Front Slab Weights - 1:8th Scale Designed to fit on 1:8th Scale John Deere tractors produced by Scale Models. Uses M2 Screws to attached to tractor. Holes will need to be drilled and tapped on tractor.
Basic stand that can hold graded cards that have Graded Guard protective cases.
Simple windowing of the original magwell - from files at the time of posting this. Added fillets on the window, adding 2 darts remaining in mag index - I never printed this version but assume it will print fine. OOps, noticed someone…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the PSA…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the SGC…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping PSA…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the…
This is a remix of the cheek riser designed by shoelesshistorian. I found the original design somewhat difficult to assemble and slightly unstable. This remix prints the cheek riser as one piece, making it easier to print and assemble…
Scraper Holder for CONCRETE SLAB setup | BAMBU LAB (note: Just slide the print between the printer and the concrete slab!)
Works, and looks good while doing it. used with microArc's wide versions of the Windowed Magwells linked below https://www.printables.com/model/812494-slab-v4-windowed-magwells
A slab type holder for empty Pokemon booster packs. You can use 2 or 3 junk cards to fill the pack out before sliding it into place. Make sure the edges of the opening aren't over-extruded as that can ruin the pack.
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice 20250607 Update: MuzzleA (1) wrong file, correct version updated This will need two sets of SLAB hardware (12 in barrel) and will need the following additional…
Had excitedly received the Haslab Omega Prime and really appreciated the work the design team did on the bots and also their very thoughtful addition of the global space bridge display stands! Just one thing thought - as they are, they…
And here's the portal add-on set to further enhance the space bridge extension kit we've previously released. This set's portal arch pegs into the 5mm ports on the sides of the earlier extension set, which is itself connected in between…
Top Loader, Slab, and Singles Card Stand. Redesigned to hold slabs as well as singles and top loaders. check out my other top loader displays. These are only single tier stands to accommodate sellers who sell singles, slabs, and/or using…
Squirtle Top Loader, Slab, and Singles Card Stand
Charmander Top Loader, Slab, and Singles Card Stand
Gengar Top Loader, Slab, and Singles Card Stand
Happy Printing PC builders and Card Collectors! Have you ever wanted to add a graded card to be part of your PC build?! This is a custom variation of the Titan All-In-One Cooler Capswap will allow you to do so! I made this design to…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, all from 149…
These fonts are free to use from fonts.google,com but I’ve already converted them into STL files for you. So you don’t have to spend time making them yourself. Feel free to download and use them as you like. Category: 3D Printing
I randomly found myself wishing that the SLAB had a ball detent system like many of SillyButts' other blasters(Not like it would be that useful, your hand keeps it closed already), but I realized that magnets are way easier. So this model…
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the card as possible, a support on the back to help…
"Powerful and reliable, the SLAB is one of the most popular lever-action blasters in the hobby. It is most effective at close to medium range. This custom paint job takes inspiration from traditional Chinese porcelain and Delft Blauw art.…
A lever with a slightly more organic shape, born out of the Inheritance SLAB project. I wanted a lever that kept the profile of the original standard lever, so a big loop lever was off the table - but the levers that are included in the…
If you've got some small rock slab cuts laying around and want a beautiful way to display them, this is the model for you. It's also got a little ‘plaque’ that we laser cut out of wood and etched but could be 3d printed also. This plaque…
A thin strip of material to use with a rolling pin to create a 7mm thick clay slab. Print two and use with a rolling pin.
Version 4 of my Gameboy SP Slab design. Please choose a set from the zip folder options. A build video can be found on my youtube where I have disabled ads for your viewing pleasure: There are multiple options to choose from in the build,…
Simple slab fidget that feels nice in my hand and looks cool with transparent pla and honeycomb infill.
Allows the use of a ChaosLabs CNC Optotap bed level sensor with the voron tapchanger system to enable gcode based automatic nozzle height detection without having to add a bed sensor to each toolhead. I use RRF on duet3d boards and…
Here is a simple and clean PSA slab display/card Holder with Pokemon Logo but can be used with other slabs. Printed with 0.4 nozzle with normal support under Logo. Standard PLA Print Lines in Photos are exaggerated from actual model. they…
I decided to print my SLAB in the colors of the trans flag, and I came up with this silly name which I decided to make custom left and right cover plates for. these parts replace the “SideCover_L” and “SideCover_R” files, and I recommend…
What if you could pop a magazine into your SLAB with four or five short darts ready to go and ALSO single-loaddarts directly into the chamber? Here's my attempt at a hybrid loading system, based on Studio_Revoct's Zeal mag and using their…
