SLAB Cheek Riser - One Piece (easy assembly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the cheek riser designed by shoelesshistorian, now printed as one piece for sturdiness and easy assembly.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 50
- Wydruki
- 2
- Wyświetlenia
- 394
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the cheek riser designed by shoelesshistorian.
I found the original design somewhat difficult to assemble and slightly unstable. This remix prints the cheek riser as one piece, making it easier to print and assemble while simultaneously making it stronger and requiring no additional hardware (just the two screws from the original SLAB stock).
The height is nonadjustable, but equal to the lowest setting on the adjustable version.
I printed with 4 walls at 10% Gyroid.