Corsair Titan Capswap Module - PSA Slab Holder

Happy Printing PC builders and Card Collectors!

Have you ever wanted to add a graded card to be part of your PC build?!

This is a custom variation of the Titan All-In-One Cooler Capswap will allow you to do so! I made this design to incorporate a shelf to hold your graded slabs at a 45° orientation. The STL file provided consists of two parts. One part is the attaching clip that will connect to the cooling block from the AIO. The second part is the shelf. I broke the full model into two parts so that they can be printed in place without supports. 

Provided are two files one has a solid bridge and the other has a hex pattern. 

Below are the instructions for slicing and assembling the model (verify your printer is able to stay within +/-.003" tolerance):

1. Slice the model as shown below (orientation is important to avoid using supports, see below). Model was sliced using the .150mm structural preset for MK4S/MMU3 with 15% gyroid infill.
2. Once the parts have been printed you will need superglue to join the two pieces together. The tail of the shelf will have a tight and snug fit into the housing of the attach clip. Both parts will join at the joint as shown below. You can apply the glue into the housing cavity and press in the shelf.
3. Hold for a minute for the glue to set in and bond both parts together. 
4. Once the parts have been assembled, you are ready to place into your AIO system. It is recommended to use PETG to prevent warping of the assembled shelf.

I hope you all enjoy the 3d print and are able to show case your personal collection of graded cards! Let me know if you have questions or concerns, as I can make adjustments to the models to compensate for interference with other PC parts or the interface with the slabs.

Note: use at your own risk, not responsible for damaged slab