Metric SLAB printable priming bars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable versions of the aluminum priming bars for the metric version of Sillybutts' SLAB
- Ocena
- 4 / 5
- Polubienia
- 15
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 654
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are 3d printable versions of the priming bars for the metric version of the SLAB. These were designed to fit the Ender 3 printbed (and probably a Prusa 3? If not let me know).
The short one required no modification since you can place it at a 45° degree angle and it will fit the printbed. The long one needed to be divided in two parts that you'll also place them at a 45° degree angle on the printbed, then they will fit together snugly and will be firmly held in place by the SLAB sideplate. The M5 screw will just screw in as normal. For the rest build the SLAB as normal.
I recommend to print them in PETG or anything stronger with 5 perimeters and 100% infill.