1 / 3
Support for Ikea Myrvarv LED strip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 support types for the IKEA Myrvarv LED strip to go with the Lack Enclosure V2
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 1031
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
The IKEA Myrvarv is a great way to light up your 3D printer's enclosure. It runs on 24V so it can be connected directly to the power source of the Prusa MK3S, making it an elegant and convenient solution.
I offered 3 types of support:
- corner mount - my favourite - use a screw to connect it to the Ikea Lack's legs;
- regular mount - also via screw;
- regular mount no hole - use this if you want to mount with glue or double sideded tape ( which I did on the back );
No rafts, no supports are needed, just print as is.
Electrical part
Look for the pictures to see how I hooked it up, though I can't promise this is the best way to do it.