Screw for 8mm in Softwood for Ikea Kura hack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw for 8mm in Softwood for Ikea Kura hack
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We converted the Ikea Kura from a loft bed into a bed with a play area. To allow some ventilation for the mattress, two 60x40mm wooden beams were placed on the floor, onto which the slats were attached. The screws were designed so that the slats have a bit of play but do not fall out, unlike when using wooden dowels. The FreeCAD file is included, making simple modifications possible. The FreeCAD plugin "Thread Profile" is required.
In German:
Wir haben das Ikea Kura von einem Hochbett in ein Bett mit Spielebene umgebaut. Damit die Matratze etwas belüftet wird. Wurden auf dem Boden zwei 60x40mm Kanthölzer gelegt, auf welche der Rost befestigt wurde. Die Schrauben wurde so designt, das die Latten des Rostes noch etwas Spiel haben, aber nicht herausfallen, wie es bei der Verwendung von Holzdübel der Fall gewesen wäre. Die FreeCad Datei ist mit dabei, sodass einfache Modifikation möglich sind. Es ist das FreeCad Plugin Thread Profile notwendig.