1 / 1
Headlight Wiper Cover Volvo S70/V70 1st gen — zdjęcie 1

Headlight Wiper Cover Volvo S70/V70 1st gen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover plug for removed headlight wipers on Volvo S70, V70 1st gen. Cavity for axle if it is cut flush with the front.

Ocena
0 / 5
Polubienia
14
Pobrania
119
Wydruki
0
Wyświetlenia
738
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Cover plug for removed headlight wipers on Volvo S70, V70 1st gen. Contains a cavity to be able to fit even when the axle/motor assembly has not been removed entirely but only cut flush with the front using a Dremel or such. Disconnect the motors with contacts placed above the headlights and make knots on the headlight washer hoses.

On my car the covers fits nice with just pressing them in place, but some hot glue might be useful for securing them permanently.
 

Print with 100% infill so they become fully opaque.

For maximum finish on the visible side print with the hole facing down, use a raft, supports and maybe even ironing. Use high quality setting.

For a good enough result without the hassle of removing supports print it with the hole facing up, a raft might be good for getting better first layer on the part depending on your printer. Use high quality setting.

 

Hope it makes your car look better and maybe even decreases fuel consumption a tiny bit.

Would love to see some pictures of this out in the wild!

I also include the SCAD-file in case you want to adjust it or maybe emboss/deboss something on it.


 

 

 

 

 

 

Tagi