1 / 3
Odoga SGR-NX3012SK-3 Inverter Mount — zdjęcie 1
1 / 3

Odoga SGR-NX3012SK-3 Inverter Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Mount with Screwholes for the Odoga SGR-NX3012SK-3 Inverter.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

A Mount with screw holes for the Odoga SGR-NX3012SK-3 Inverter.

The 2 Plates use the screws, that are already in the Inverter. Just unscrew them and screw them back in with the mounting plates in between. This was designed specifically for the Odoga SGR-NX3012SK-3 Inverter.

The Mount is available in 2 Versions:

  • Outer Mount (Mounting Holes are on the Outside and can be easily screwed into whatever surface you want without measuring beforehand.)
  • Inner Mount (Mounting Holes are on the Inside and must be measured/marked beforehand. After screwing the Mounting Plates in place, the inverter can be slid in between and screwed in. This is more complicated but hides the Mount under the Inverter.)

I recommend printing it in PETG with 3 Walls and 25% Infill. The Models are already oriented.

Tagi