1 / 3
Odoga SGR-NX3012SK-3 Inverter Mount — image 1
1 / 3

Odoga SGR-NX3012SK-3 Inverter Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Mount with Screwholes for the Odoga SGR-NX3012SK-3 Inverter.

Rating
0 / 5
Likes
0
Downloads
11
Makes
0
Views
105
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

A Mount with screw holes for the Odoga SGR-NX3012SK-3 Inverter.

The 2 Plates use the screws, that are already in the Inverter. Just unscrew them and screw them back in with the mounting plates in between. This was designed specifically for the Odoga SGR-NX3012SK-3 Inverter.

The Mount is available in 2 Versions:

  • Outer Mount (Mounting Holes are on the Outside and can be easily screwed into whatever surface you want without measuring beforehand.)
  • Inner Mount (Mounting Holes are on the Inside and must be measured/marked beforehand. After screwing the Mounting Plates in place, the inverter can be slid in between and screwed in. This is more complicated but hides the Mount under the Inverter.)

I recommend printing it in PETG with 3 Walls and 25% Infill. The Models are already oriented.

Tags