Fuga Adapter for Aqara Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for fitting the Aqara Temperature and Humidity Sensor in a Fuga Frame
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
**Added another version with closed front Fuga Adapter for Aqara Sensor with closed front**
With this Fuga adapter it's possible to fit the Aqara Sensor in a LK Frame.
If You use the 63 Frames.
I Suggest You use the new Frame with two pieces (Technical Frame and Design Frame).
You can use the old ones (Single Piece), but You won't have have any holes to fasten it.
And it's difficult to take out the adapter.
The Sensor has to be placed from the the back of the Adapter.
I've Added two Prints.
If the one is to tight use the “Not_as_tight”
This i a Remix From Per Mejdal Rasmussen's Hue smart knap holder til FUGA I Just Modified it to fit an Aqara Sensor and added holes in the front.