Makita DHP Gridfinity Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Gridfinity Tray for the Makita DHP Drill
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Makita DHP (484) Gridfinity Tray
First of all
A hughe Shout-Out to Hudston, who made the Parametric Gridfinity Fusion 360 File. Without him I would not have been able to create this weird shaped object.
Story of the Modell
I recently purchased the Makita DHP 484 but without a box. I then bought a Makpac and found out that the drill itself was almost getting lost inside the box and anything else than stable.
Luckily I found the Makpac Gridfinity Inserts by Guto and also the magnet version by TmDvd. Unfortunately there was no insert available to fit the drill. So I started searching for something and came up with this modell.
About the Modell
As already mentioned: the model is intended for the Makita DHP 484.
I guess it's compatible with other models, but I don't know!
There are two versions available: the regular and the slim one. In the pictures you can see the regular one. I did not try the slim one and don't know for sure if it will fit once it's printed. So feel free to try it out if you got filament laying around.
There are also two different heights available. The “Low” version is 26mm high in total. while the “High” one is 53mm high in total (the last one should equal to 7 Gridfinity height units if I'm not wrong).
And the best at the end: the model is small enough to fit the Bambu P1S Base Plate :-)