P
Printablestriplesine
Makita MakPac Clip
Just print with the outward face on the platter and it should be all good ! Feel free to also check out my wheels file here .
- Pobrania
- 1350
- Polubienia
- 235
- Ocena
- 4,5
Wyniki wyszukiwania: makpac
Liczymy pasujące modele…
P
Printablestriplesine
Makita Makpac wheels attachment
These wheels should be much cheaper to make and more practical than the Dolly Trolley as you can lift the whole stack of cases and the wheels will stay on the stack. I have a stack of 4 cases and it rolls without any problem, I would not…
- Pobrania
- 833
- Polubienia
- 198
- Ocena
- 3,25
P
PrintablesClemens
Makita Makpac Hinge Pin Replacement
Printed in ABS with 100% infill
- Pobrania
- 202
- Polubienia
- 14
- Ocena
- 0
P
PrintablesJordan Ludusan
Makita Makpac Runners/Rails for Storage
Makita Makpac Runners/Rails for Storage. Print out of PETG for maximum durability, 3 perimeters.
- Pobrania
- 110
- Polubienia
- 16
- Ocena
- 0
P
Printableswenjuk
Makita Makpac Nuss und Adapter Kasten Nut and Adapter Case
A case designed to efficiently store a Makita Macpac 2 cordless screwdriver, along with nuts and adapters, in a space-saving manner. No supports needed.
- Pobrania
- 34
- Polubienia
- 4
- Ocena
- 0
P
Printablessuit
Makita MAKPAC Mini; Size 1, 2, 3 and 4 (50 % scale)
The original MAKPAC is expensive, so why not after all 3D print it? Yes - possible, but there are no models available and 3D printing a 30x40 cm piece will cost you almost the same as buying an injection moulded part. Also most printers…
- Pobrania
- 2823
- Polubienia
- 543
- Ocena
- 5
P
PrintablesGuto
Gridfinity MakPac Systainer Baseplate
Gridfinity baseplate for Makita MakPac Support needed (Someone printed it upsidedown and it worked but I didn't try) It does not fit in the MakPac type 4 (sorry el_flexos ). I'll try to create a new version for it. Makpac Case Type 1…
- Pobrania
- 2379
- Polubienia
- 371
- Ocena
- 4,83
P
PrintablesJeb Lee Tark
Makita MAKPAC storage organizer boxes
Makita offers this storage container product with or without the matching insert boxes. It's cheaper than the usual organizer of this kind, and interlocks with other toolboxes as well. The container's internal structure provides the usual…
- Pobrania
- 1524
- Polubienia
- 333
- Ocena
- 5
P
PrintablesJannisJFry
Makita Makpac attatchment/mounting blocks
These are mounting blocks to mount your makpac boxes to something. I built them to mount my makpacs to a roller board. They are designed to fit on a 300x400 mm board. To mount your makpak just press in the front side, and the push down…
- Pobrania
- 1457
- Polubienia
- 167
- Ocena
- 4,89
P
PrintablesStainlessMike
Makita MakPac Trolley (compatible with Festool Systainer)
Stack and clamp your Makita MakPac or Festool Systainer boxes on this convenient waggon for convenient transportation and for quick rearrangements in narrow shops and build sites at any time by simply rolling them around on wheels. This…
- Pobrania
- 1042
- Polubienia
- 277
- Ocena
- 4,75
P
PrintablesBashbear
Makita Makpac Mounting Blocks Modified
Updated Version of the great mounting blocks from the original model for newer MacPacs
- Pobrania
- 726
- Polubienia
- 87
- Ocena
- 5
P
PrintablesRicardo Vakkers
Makita Makpac boxes
STL file of 12 boxes to fit in a Makita Makpac box. Can be modified. Enjoy and get organized.
- Pobrania
- 511
- Polubienia
- 60
- Ocena
- 0
P
Printables3DPrintsBF
Corner Bins for Gridfinity MakPac
UPDATE: Uploaded the STEP file as i was asked for it several times :-) Infected by Gridfinity Virus i found the grid for Makita MakPacs and thought, great solution to store my screws and other tiny stuff together with other MakPacs of my…
- Pobrania
- 494
- Polubienia
- 97
- Ocena
- 5
P
PrintablesStainlessMike
Makita MakPac Clip
This is just a minor modification of triplesine 's awesome Makita MakPac clip : https://www.printables.com/model/213157-makita-makpac-clip I used this modified clip version for my Makita MakPac trolley model:…
- Pobrania
- 493
- Polubienia
- 83
- Ocena
- 5
P
PrintablesAlego
Hinge pin for Makita MakPac box -
Hinge pin for Makita MakPac box Please print in PETG with 4 perimeters. The pin can be reinforced by screwing in a M4 x 30 screw. ############ Scharnierstift für Makita MakPac Box Bitte in PETG mit 4 Perimeter drucken. Der Stift kann…
- Pobrania
- 383
- Polubienia
- 50
- Ocena
- 5
P
PrintablesGibonArt
Makita Makpac Grid System Boxes
Redesigned boxes that fit OEM makita organizers or my Makpac Grid system . Design is inspired by the Makpro series from Makita. Height 68mm. Base size of the 1by1 box is 50x50mm.
- Pobrania
- 352
- Polubienia
- 52
- Ocena
- 0
P
PrintablesBernd
Gridfinity MakPac Systainer - Big Toolbox
Created big Toolbox for MakPac
- Pobrania
- 313
- Polubienia
- 55
- Ocena
- 5
P
PrintablesOesie
Makita Makpac Case Type 3 - Gridfinity baseplate
About A gridfinity baseplate for your Makita Makpac case type 3 (the original model wouldn't fit the type 3 case). This remix is based on the version 2.1 (the two .3mf files are original and not modified). The dimensions of the type 3…
- Pobrania
- 305
- Polubienia
- 52
- Ocena
- 5
P
PrintablesRanseyer
Compartiments for makita Makpac 2 systainer |Abteilung Trennbox
Custumized compartments for my Makpac 2 (left + right side) for tools For the middle compartment: Follow the link to the original. I dont use it, Instead i have som other boxes (originally from HARIBO) inside. Inportant: The compartments…
- Pobrania
- 279
- Polubienia
- 52
- Ocena
- 5
P
PrintablesFlintyk
Fnirsi HS-02a Soldering Iron Storage Insert for Makita MAKPAC Mini Size 1
Fnirsi HS-02a Soldering Iron Storage Insert for Makita MAKPAC Mini Size 1
- Pobrania
- 263
- Polubienia
- 47
- Ocena
- 5
P
PrintablesHer MannF
Makita Box MakPac broken hinge support
Makita Box MakPac broken hinge support. A nice upcycling so you don't have to throw away the box. Can be used on both sides Simply Reflect the part in the slicer. I glued it into the existing lid pocket with super glue.
- Pobrania
- 261
- Polubienia
- 39
- Ocena
- 5
P
PrintablesTmDvd
Gridfinity Makpac stackable tray (magnetic)
I made this stackable tray to house all of my Gridfinity containers without having to rearrange them every time. Each panel uses an 8 x 6 grid. You can stack up to 2 containers at a height of 3 to be at the same height as the handle.…
- Pobrania
- 256
- Polubienia
- 65
- Ocena
- 0
P
PrintablesTD3D
Makita Makpac front Handle
Makita Makpac Front Handle. #### 30.12.24 Update: Achtung! Ich habe zwischenzeitlich eine Fehlerhafte "Handgriff" Datei hochgeladen mit dem geänderten Schriftzug “TD3D” bitte diese nicht ausdrucken, ich werde eine überarbeitete Version…
- Pobrania
- 207
- Polubienia
- 56
- Ocena
- 0
P
Printablesviktor
Organizer / Inlay / Tray for Mini MAKPAC from Makita
I created some inlays/trays for the MAKPAC mini from @suit. There are different sizes to fill the MAKPAC according to your needs. For the top tray, you can use the Cover, that is simply glued to the tray.
- Pobrania
- 171
- Polubienia
- 33
- Ocena
- 0
P
PrintablesIron Momo
Makita Makpac Mounting Blocks
These are mounting blocks to attach your makpacs to a board. The original design from @JannisJFry is great, but I dit not have the correct screws available. The STL files are designed to be used with 4mm diameter screws. If you want to…
- Pobrania
- 165
- Polubienia
- 18
- Ocena
- 0
P
PrintablesTmDvd
Gridfinity MakPac Systainer magnetic Baseplate
Print the six parts and glue them together. You will need around 150 magnets to fill all spots.
- Pobrania
- 158
- Polubienia
- 42
- Ocena
- 5
P
Printablesshicks101
SDS drill holder for Makita MakPac 4 case
SDS drill bit holder that fits into a Makita MakPac4 case in a empty battery slot. Print with a TPU filament, 10% infill and 2 shells for the wall. Category: Tool Holders & Boxes
- Pobrania
- 157
- Polubienia
- 30
- Ocena
- 0
P
PrintablesKubiczek
Makita Makpac systainer’s organisers for drill bits
I created this organizers due to need of storing of a large number of drill bits. I did design as simple as possible. A blank space on blocks is for a possibility to add a logo in slicer. In the first “steel box” you can store drill bits…
- Pobrania
- 151
- Polubienia
- 58
- Ocena
- 0
P
Printablesmironfs
Track saw clamp makpac storage
Storage for track clamps. You have to drill systainer to mount backplate and use M5 threaded inserts inside holder. With correct orientation you dont need supports.
- Pobrania
- 146
- Polubienia
- 42
- Ocena
- 0
P
PrintablesGibonArt
Makita Makpac Grid System
I really like to keep stuff as OEM-like as possible so I designed this inlay grid system that fits OEM Makita boxes. I have also re-designed the original Makpro boxes making them smaller (68mm tall) to fit Makpac Type 1 (100mm tall)…
- Pobrania
- 138
- Polubienia
- 19
- Ocena
- 5
P
PrintablesJeb Lee Tark
Makita MAKPAC storage organizer inserts
Subdividers or inserts There are four versions right now. I only made these available for the 1x1 storage boxes, as you can subdivide a 2x1 box by using two 1x1 ones instead :) Lower divider - with half and with quarter subdivision Upper…
- Pobrania
- 132
- Polubienia
- 21
- Ocena
- 5
P
Printablesdjinyus
Makita P-84137 MakPac Storage/Tool Box Inserts
I needed some extra inserts for my Makita P-84137 MakPac Storage/Tool Box. The ones available from Makita are limited to 3 different types (1 x 1, 2 x 1 and 3 x 2) and (as far as i know) only available as a predefined pack. I decided to…
- Pobrania
- 127
- Polubienia
- 17
- Ocena
- 0
P
PrintablesSebastian Jovancevic
Makita Makpac fixierung
Makita Makpac Koffer Boden fixierung
- Pobrania
- 112
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBlankBobbes
Using Systainer³ Sys-Rails with older Systainers and Makpacs
I came across the Festool drawer slide – Systainer³ Case Rails on Maker World . These guide rails can also be used effortlessly with older Systainer models such as the Systainer Classic , Systainer T-LOC , and Makita Makpac . Dimensions…
- Pobrania
- 103
- Polubienia
- 23
- Ocena
- 0
P
PrintablesDalejandro
2025 Makpac Case clasp - Clip - lock
This is a completely modified model to work just like the original, the fit is very good, we tried to make it as close as possible to the original design, it can be compatible for Festool and Hikoki boxes. so a model without logo is…
- Pobrania
- 94
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJaap
Makita MAKPAC Storage organizer boxes extended
The regular (original) boxes/inserts in full height or half height and recommended print settings can be found here: Additional boxes 3x2 half height - 1x2 dividers - lower 3x2 half height - 1x2 dividers - upper
- Pobrania
- 83
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMUTEtheCyberwolf
MAKITA Handgriff Halter für Makpac oder Vergleichbar
Simple Zusammenfassung: Aufrecht drucken mit einem etwas flexiblerem Material (Nutze hier PA12/Nylon). Gedruckt wurde mit 6 Wandlinien und 60mm/s Druckgeschwindigkeit auf einem CR-10S welcher mit Klipper, Titan Heatbreak und DD Extruder…
- Pobrania
- 78
- Polubienia
- 26
- Ocena
- 0
P
PrintablesToots
Makita MakPac 2040 clip-on top frame
Makita MakPac 2040 top frame. Used pieces from a Bear frame Upgrade because thats what I had. Any other profile should work as well. Minimum slack. Tight. Flat. The handle is still free to be used. Designed to sit in the grooves and…
- Pobrania
- 76
- Polubienia
- 13
- Ocena
- 0
P
PrintablesLukasQ
Hinge pin for Makita MakPac box - Short Version
For whatever reason, Makita build that strange material and space consuming hinge system. I fixed that for them. Print in preferably PETG at 0,2mm with 100% infill. Bolt in place with a countersunk screw. Anything from 3x15 to 4x20mm will…
- Pobrania
- 74
- Polubienia
- 26
- Ocena
- 5
P
Printablesmironfs
Track saw square makpac holder
Holder for cheapo track saw chinese square inside systainer. I just used double sided tape. No supports needed if placed correctly. You have to print two pieces, one mirrored.
- Pobrania
- 69
- Polubienia
- 18
- Ocena
- 0
P
Printablespolkyk
MAKPAC štítky
4 štítky podle velikosti MAKPACu. Nápis si každý může přidat ve sliceru. název písma - LINOTYPE ATOMATIC
- Pobrania
- 67
- Polubienia
- 6
- Ocena
- 0
P
Printablesvixvix
Festool Systainer Makita Makpac toolbox cleats
Inspired by https://www.printables.com/model/187763-festool-tanos-makita-hitachi-systainer-cleats , the size doesnt fit my need so I measured and made my own. My primary usage is to dock the Milwaukee debris separator on the Festool dust…
- Pobrania
- 66
- Polubienia
- 8
- Ocena
- 0
P
PrintablesVanDerPol
Griff für MakPac / Handle for MakPac
Ich hab meine Makita MakPac da quer in meinem Kasten stehen wegen Platzmangel. Da war das raus ziehen immer eine fummelige Angelegenheit. Somit hab ich mir jetzt einen kleinen Griff konstruiert damit ich die Kiste einfach aus dem fach…
- Pobrania
- 64
- Polubienia
- 11
- Ocena
- 0
P
PrintablesPanda
Makita MakPac Consignment Car(TR00000002) Suppot Foot
Makita MakPac Consignment Car(TR00000002) Suppot Foot
- Pobrania
- 45
- Polubienia
- 5
- Ocena
- 5
P
PrintablesBARRAGE
Makita Makpac 3 drillbit case holder
The x75 drillbit case that came with my Makita DHP485 LXP drill only fits inside the Makpac one way, ("flat"), and I wanted to fit as many of my tools as I can into it. This holder works with the “Makpac 3” version of the Makita case…
- Pobrania
- 35
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKalZf
Makita MAKPAC organizer inner box inserts
These inserts work with Makita's original 50x50mm boxes (SKU: 191x93-3) Link: Makita MAKPAC Interlocking Organizer with Inserts, model number 191X80-2 Makita 191X93-3 Makpac Organizer Inner Box, 50 mm Length x 50 mm Width
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLordWiggle
Makita M box / Makpac Organizer, 2x2 tray router bit insert
This is an insert for the standard 2x2 inserts for a Makita M box / Makpac Organizer. I made it for 6mm and 8mm bits.
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMelmer
Makita MakPac / Mbox Drawer holder
Fix your Mbox / MakPac to a drawer or something else to hold it in place. I printed it in a PLA (FormFutura rPLA Turkish Blue). 15% infill (took ~1hr on my v0 to print).
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 5
P
PrintablesJoshRC
Simple Makpac, Classic Systainer and Hikoki System Case Mounting Blocks Holders
This simple mounting System works for Makita Makpac, Hikoki System Case and of course the Classic Systainer. To take out the systainer, you just lift it up.
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 0
P
PrintablesQwertz
Makita MAKPAC Scharnierstift
Beschreibung Ersatz-Scharnierstift für Makita MAKPAC Systemkoffer Der originale Scharnierstift (Makita Originalteil-Nr. 453972-2 ) an meinem MAKPAC-Koffer ist leider kaputt gegangen. Deshalb habe ich ein passgenaues Ersatzteil modelliert…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSchotte
Makita MAKPAC Adapter
This allows you to stack and connect any box on top of a Makita Makpac. Toolboxes, Euroboxes and other containers. You will need 2 Wood pieces (25x35x280mm) and 8 Countersunk Screws (3x25mm - Longer is fine) and 4x the 3D printed Model…
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
PrintablesCombatdaniel
Makita & Milwakee Mini Storage Boxes - Makpac - Milwakee
Remixed from a release of the Makita Makpac scan, I have removed unnecessary geometry for smaller scale and simplified the boxes into small little storage boxes for small tools like screws and accessories. I have added a Milwakee logo…
- Pobrania
- 24
- Polubienia
- 16
- Ocena
- 0
P
PrintablesZachy
Makita MakPac, Festool Protool Systainer Case Locking Clip
how to print: 6 layers 40% infill (but 6 layers causes almost 100% infill) material ABS (PET-G might also work, but in my attempts it broked early)
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLubis
Essbox grid for Makita Makpac
The grid is made out of four parts, you might have to cut some of the tabs to have it fit snug in your Makpac, depending on which one you have.
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
PrintablesСергей Черноиванов
Makita MakPac под шуруповерт ударный
под низкий ящик, материал pet.
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDrVoidberg
Makita Makpac Multiboard (Multibin) Adapter
Adapters for front and sides to remove the play when inserting Multibin grids into Makita Makpac. Use your printer's default settings. Printed in PLA on an Elegoo Centauri Carbon.
- Pobrania
- 2
- Polubienia
- 2
- Ocena
- 0
P
Printables
Makita MAKPAC organizer inner box inserts
These inserts work with Makita's original 50x50mm boxes (SKU: 191x93-3) Link: Makita MAKPAC Interlocking Organizer with Inserts, model number 191X80-2 Makita 191X93-3 Makpac Organizer Inner Box, 50 mm Length x 50 mm Width
P
Printables
Organizer / Inlay / Tray for Mini MAKPAC from Makita
I created some inlays/trays for the MAKPAC mini from @suit. There are different sizes to fill the MAKPAC according to your needs. For the top tray, you can use the Cover, that is simply glued to the tray.
P
Printables
Makita MAKPAC Scharnierstift
Beschreibung Ersatz-Scharnierstift für Makita MAKPAC Systemkoffer Der originale Scharnierstift (Makita Originalteil-Nr. 453972-2 ) an meinem MAKPAC-Koffer ist leider kaputt gegangen. Deshalb habe ich ein passgenaues Ersatzteil modelliert…
P
Printables
Makita Box MakPac broken hinge support
Makita Box MakPac broken hinge support. A nice upcycling so you don't have to throw away the box. Can be used on both sides Simply Reflect the part in the slicer. I glued it into the existing lid pocket with super glue.