Gridfinity Makpac stackable tray (magnetic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this stackable tray to house all of my Gridfinity containers without having to rearrange them every time.
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 256
- Wydruki
- 1
- Wyświetlenia
- 1952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this stackable tray to house all of my Gridfinity containers without having to rearrange them every time.
Each panel uses an 8 x 6 grid.
You can stack up to 2 containers at a height of 3 to be at the same height as the handle. Otherwise it can no longer be stacked.
I recommend always creating a height of 6 for stacking in the middle of the plate. So it cannot bend or brake.
-------------------------------------------------------------------------------------------------------
VERSION 2
I made a second version with a better handle to make it easier to remove the tray. There is also an undivided version of each for printing with a large print bed.
-------------------------------------------------------------------------------------------------------
Printing and Assembly
- choose the model you want
- print all the parts (don't forget the handle)
- glue the panels together
- insert the connectors (also use glue)
- install the ruthex inserts in the handle
- screw everthing together
(I first glued the panels together and then inserted the connectors)
I printed the tray in PLA and PETG with no problems
Required Components
- M3 ruthex (or same sized M3x5.7) inserts x8
- M3x12 screws x8 (M16 also work)
- M3 washers x8