Scent/Aroma Diffuser with 60mm fan (Duftverteiler)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A "case" for a fan and a reed diffuser, because it didn't work well enough on its own without a fan.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for a reed scent diffuser and a 60x15mm fan. I use a Noctua NF-A6x15 5V fan with a 5V USB Adapter and a Philips Hue plug that automatically turns it on every other hour for a couple of minutes. Modeled so it blows down instead of up, because I put it on a high cabinet in my bathroom. Probably works with many reed diffusers, mine is 60x60mm cube from Jean & Len, that's what I modeled it after. The Reeds had to be cut in half to fit into the finished print.
Printing:
Main Body can be any percentage of infill or solid, I used PETG with the Prusament PETG preset, supports might be needed for the Fan hole (Organic supports work well, easier to remove, faster to print), not needed for the screw holes. Use heat-set M3 inserts (the ones from CNC kitchen for example) to screw the side panel on after installing the fan. Fan mounting can be heatset inserts (if you can fit them into the holes), or just sliding the fan into its slot). Power the fan with whatever you want, an ESP32 with a relay might work as well.