Brick Tree Kit Card
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Brick Tree it is inspired by popular brick company tree. Made this on kit card to have more fun. Give it away as a gift or put it together with kids or if you feel very adventurous, do it by your self, there is no manual included :) Obviously for legal or illegal reasons I had to come up with original name, but I know it is not very original.
Printed in different brand PLA to find out the best tolerances for model, but it did vary from brand to brand, so I hope this will work for you. If centre post is a little bit too long, just snip tiny bit off. You will need snips anyway. There will be lots of snipping at beginning.
Printing:
0.4mm nozzle
0.16mm layer height
slow down walls and top layer
10% infill
Do not scale up as it will not work, tolerances will be too loose.
Have Fun. Any feedback welcome