Brick Tree Kit Card
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Brick Tree it is inspired by popular brick company tree. Made this on kit card to have more fun. Give it away as a gift or put it together with kids or if you feel very adventurous, do it by your self, there is no manual included :) Obviously for legal or illegal reasons I had to come up with original name, but I know it is not very original.
Printed in different brand PLA to find out the best tolerances for model, but it did vary from brand to brand, so I hope this will work for you. If centre post is a little bit too long, just snip tiny bit off. You will need snips anyway. There will be lots of snipping at beginning.
Printing:
0.4mm nozzle
0.16mm layer height
slow down walls and top layer
10% infill
Do not scale up as it will not work, tolerances will be too loose.
Have Fun. Any feedback welcome