Ultimaker 2 replacement part for part cooling airduct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this part is designed so that it can be inserted in the cavity of the metal fan shroud, using the original screws.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
this part is designed so that it can be inserted in the cavity of the metal fan shroud, using the original screws. It's for when one (or both) of the metal flaps are broken off due to metal fatigue and you don't want to replace the entire fan shroud.
It can be used any Ultimaker 2 model since they all have the same fan shroud
Print Settings
Printer Brand:
UltiMaker
Printer:
**Rafts:**No
Supports:
Yes
Remove support material
How I Designed This
using the dimensions of this model and Tinkercad, I was able to make a part that could be inserted in the cavity of the metal fan shroud, using the original screws.
Category: 3D Printer Parts