Mercedes C Class W203 - Registration Light Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mercedes registration plate light housing replacement. Original mercedes part "A 203 802 07 56" - this seems to be NLA.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The goal here is the same as the original however i found that the parts i had when testing the original didnt work quite as i had wished.
One concern i had was waterproofing- this led med to design a clip style close to the original that allows me to attach it to the body of the car in a way that squished the gasquet nicely up between the hosing and the car body.
Material:
My variety im using of this is printed in nylon seen in “white” in the picture.
Supports and orientation:
I use branch style supports at 15% density. I orient the model such that the narrow bit (connector) is downwards- as this leaves the inside and visible areas of the model with a nice finish.
Gasquet:
In the picture you will see as gasquet that get placed between the car body and the model. In my case i cut the old one off the remains of the connector i had.
Specs: ~2mm thick when not squished. Aprox 0.75mm when squished. Aprox 0.5mm when squished hard.