Mercedes C Class W203 - Registration Light Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mercedes registration plate light housing replacement. Original mercedes part "A 203 802 07 56" - this seems to be NLA.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The goal here is the same as the original however i found that the parts i had when testing the original didnt work quite as i had wished.
One concern i had was waterproofing- this led med to design a clip style close to the original that allows me to attach it to the body of the car in a way that squished the gasquet nicely up between the hosing and the car body.
Material:
My variety im using of this is printed in nylon seen in “white” in the picture.
Supports and orientation:
I use branch style supports at 15% density. I orient the model such that the narrow bit (connector) is downwards- as this leaves the inside and visible areas of the model with a nice finish.
Gasquet:
In the picture you will see as gasquet that get placed between the car body and the model. In my case i cut the old one off the remains of the connector i had.
Specs: ~2mm thick when not squished. Aprox 0.75mm when squished. Aprox 0.5mm when squished hard.