Unifi Access Button (UA-Button) Wall mount box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount box (presumably US-style) for Unifi Access push to exit button.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mount box for Unifi's Push-to-exit button designed for UniFi Access Hubs. (Code UA-Button)
Presumably a US standard (I'm in Australia), so may be suitable for other US electricals. I've included a dimensional drawing for your reference.
There are two versions - one with a hole for a 20mm conduit, and one without. Note that the conduit is offset in my install pictures - this was to accommodate installed conduit that suited our Australian boxes. The included modelled conduit hole is central, not offset.)
Prints without supports. 15% adaptive cubic infill but I don't think it matters what you use. The screw threads are modelled to suit the screws included with the button. Screw them in carefully to avoid destroying the plastic threads.