Unifi Access Button (UA-Button) Wall mount box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount box (presumably US-style) for Unifi Access push to exit button.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 88
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Wall mount box for Unifi's Push-to-exit button designed for UniFi Access Hubs. (Code UA-Button)
Presumably a US standard (I'm in Australia), so may be suitable for other US electricals. I've included a dimensional drawing for your reference.
There are two versions - one with a hole for a 20mm conduit, and one without. Note that the conduit is offset in my install pictures - this was to accommodate installed conduit that suited our Australian boxes. The included modelled conduit hole is central, not offset.)
Prints without supports. 15% adaptive cubic infill but I don't think it matters what you use. The screw threads are modelled to suit the screws included with the button. Screw them in carefully to avoid destroying the plastic threads.