Counting matching models…
A small power button for the 2024 Mac mini M4. Just push the base gently into the fan slots. This keeps it attached without the need for tape or else. Commercial use is prohibited, this also includes the photos.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
NEW MODEL 03/25 with POWER BUTTON on the front ! Improved model with mechanical POWER BUTTON extension on the front. An again improved and redesigned body for better print quality. Fits on building plates of all PRUSA Mk3,MK4, CoreOne or…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement power button for the NZXT Phantom 410 case.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
What is it? Enclosure for 30mm Arcade Button with LED . They are sold by adafruit or digikey. But I think you can find them in other places too. Why make it? Initial idea was just a secret santa gift but then I made multiples of these for…
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for one variant
This buttonhole sewing foot attachment makes sewing straight buttonholes a breeze. It grips the fabric and can only slide back and forth. This allows you to make a very tight slot without worrying that you might cross your previous…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Universal Oven Button. No need to do nothing. Ready to print
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
3d Designed and printed Compass Button Created for the Prusa Weekly Flash Contest: Buttons. Created using a traditional 12 points compass as reference. For better results scale the model up to 200% to 300%.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Doorbell cover for Ikea home smart shortcut button. https://www.ikea.com/cz/cs/p/tradfri-rychly-vypinac-bila-40467765/ Print with supports, then carefully remove it. Sliced for two colors (black last 4 layers).
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
I had a hard time removing removing SANWA-OBSF-30 without damaging the tabs by hand. So I modeled this tool to assist in extraction. Consists of a cylinder to press the tabs inward and a plunger to push the button out Should also work for…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Intro Having a flash contest is just a great way to improve your design thinking and it's a really nice idea from the Prusa team! I'll definitely have fun doing these contests! Design My design for this one is a small clothes buttons kit…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
If you find your self in a situation where you need to hide a memory card or small written message on your person, this button is for you. This button has two halves. The base is sewn onto your clothing, while the lid is attached after…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
I love using my Tiles, but their buttons drive me crazy! Even if you disable the “Find Your Phone” option in the app, pressing the button can still cause the Tile to chirp for about ten seconds. Furthermore, the buttons are incredibly…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
This is a tool to help remove 24mm Japanese pushbuttons, like Sanwa OBSF-24 Should also work with other Japanese 24mm buttons, Including OBSJ and OBSC
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
I found this useful model on the Internet. If you are one of the few people in the world that still has a TI-99/4A Peripheral Expansion Box (early version), this file may come in handy some day. *** This is NOT my original design, I'm…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Give a clean look to your fashion with a hinged-cover over your sewn buttons. These octagonal buttons have a print-in-place hinge & snap-clasp to cover the threads. In addition to your choice of colors, the look can be changed based on…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
After buying a Moccamaster KBT I realized sometimes I don't need to brew a full pot and wanted the option to use another carafe, like a large insulated thermos to brew into. The piece fits right in and presses the white button the carafe…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This little gizmo holds a miniature pushbutton switch (see photos) and has magnets on the bottom to enable it to be held firmly on steel/iron metal surfaces. The pushbutton switch used is designed to be panel mounted in a 1/4" (7mm) hole.…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
This model is an external button for push-lock systems used in camper and caravan furniture. It is designed with a larger diameter than the original , providing a more comfortable grip and making opening and closing doors and drawers…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant
This holder is designed for use with Dillon 650/750, as it attaches to the case/bullet feeder rod and is intended to hold “ Handheld case for pushbutton ”, published here on PrusaPrinters. The source model is published as well, so you can…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
This Light Switch Cover prevents someone from accidentally shutting off the light switch without covering the sensor. I have installed these light switches in the bathrooms (and several other rooms) of my home to help with younger…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
really cool!! edit it for yourself and just like and download the model for prusameters, i have 1500 so i need some more to get a 3-d printer lol…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
I recently got a soldering kit for Christmas, and I thought the buttons were a little bit boring. So I thought I might as well design my own. I modeled them in FreeCAD and then printed them on my MK4S with a few color swaps here and there…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Remix of LCD cover (for MK3S+) to fit to Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 (model without power button - see: https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without ) - it is done…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Pause button magnet for 5mm cube magnet. As the picture shows, the G-Code has a pause giving you a chance to slide in the magnet. I used a Neodymium supermagnet as obtained from…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
A 25mm diameter button in metric units. Flat face with a filleted pentagonal shape and a wide ridge.
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This is a small hummingbird with a 2mm hole on the back for sewing it onto a knitted hat. Printing I printed it face down, single color, no support, with PLA. The layer height should be a small as your printer can handle for the fine…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
A 30mm diameter button in metric units. Flat face with a filleted pentagonal shape and a wide ridge.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This button can be stitched to fabric.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
This is an alternative button cover for the HDMIPI. You can find more info on HDMIPI at http://hdmipi.com/ The Bridges are now thicker in V1.02 Instructions These were sliced with Simplify3D but other slicers should be fine. I recommend…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
We needed a button for our drink-randomizer game built using my LED-Drink-Coaster-Puzzle . I had this button, so I designed this box. Here you go :-) Printing any nice material, e.g. Prusament Galaxy PLA support: yes but with bigger…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
A simple bracket that slides into the slots on an Apple II+ or Apple //e and and holds a pushbutton. I included one that fits on the left or right side. I also included the FreeCAD source file as someone could re-use the hooks to mount…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
replacement button for hardhead childgate
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
This is a 2-state click button with an internal mechanism similar to that of a retractable pen. This can be used with or without a long M3 bolt to transfer the click action into a secondary linear or rotary motion. Use the case with holes…
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
cap for 12x12x7.3 mm button switch
Minimal back button (M1, M2) replacements for the ROG Ally. They are designed to stay out of the way and only be pressed deliberately, as the original buttons can be quite bulky. Please lower your speed settings on the top as it contains…
This snappy fidget button is extremely satisfying and a pleasure to hold in your hand, and easy to print and assemble, the required force can be set in 9 steps, does not require any additional parts, just a few drops of lube to start…
The Slimbox 2040 is a stickless, all button, low profile fightstick, remixed from the original Slimbox by jfedor . The following changes have been made with the GP2040-CE firmware and quality of life in mind: Built as a cheap alternative…
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
When you have a device with an exposed power button/switch that could conceivably be pressed by accident, protect it from such accidents by covering it with this flip-up cover. Print in place, then apply an adhesive such as double-sided…
Tested in PLA @ 0.2mm layer height. No supports. Print upright as is. Works without any processing but processing is needed if good sound is desired.
This is a 24mm arcade button housing, nut, and cap using a cherry MX Switch. The tolerances are a bit tight on the threads, 0.1mm layer height is a requirement, and the STL was mostly adjusted for my own 3D printer. You may have to play…
Edit 1/30/25: slight change to make box rectangular, and full multicolor version for Sprawlopolis and Tussie Mussie available here. This is a small hinged card box I made specifically as a hard, protective travel case for my Button Shy…
I got tired of the useless preset app buttons on my Roku remote, so I designed a clean replacement panel. No more accidentally launching Netflix when I meant to pause. Now there is just smooth, satisfying blankness instead of four ads…
This design is a clip that fits over a rada mechanical shower timed valve and keeps the water flowing without having to keep pressing the button. The cap fits over the button, press, and turn to lock onto the water pipes. Simple,…
Solid D-pads, due to their geometry, incorrectly register diagonal inputs if a cardinal direction is pressed too hard. Split D-pads solve this by having a separate pieces for each directional button, which eliminates cross-button…
This is a conversion kit for Sanwa 30 sized button to 24 sized buttons. I originally used these for testing out hitbox design when I didn't own any 24 sized buttons, but had bunch of 30 sized buttons laying around. Now I used them for…
Work in progress! This Printables flash contest was introduced just a short a week ago I really wanted to do something special this time so I have spent every free moment developing and iterating this design. I am also in a fun design…
Spring fidget button. 3 files provided (.stl & .3mf files available): - Flat Spring Fidget Button (stl). - Flat Spring Fidget Button (3mf). - Spring Fidget Button (legacy - coil spring version). Model Name : Spring Fidget Button. Material…
This is replacement power button for Galaxy S10 Plus. Printed part may vary from printer to printer so in case it won't fit use some sanding paper to adjust the part. Also it can be used as Bixby button. Put your protective case on top of…
button exterior mirror
Print all three parts. You might have to scale the nut by 1-2% / tweak print settings in order to get a good fit. I've been printing with 0.15mm layer height, but others will probably work.
It took a couple ruined live streams in which i accidentally touched the FTB-Button instead of Auto-Fade. And believe me, the black frame in program out skyrockets your adrenaline instantly... fumbling around to return the image. Since i…
Print with supports. Installation is a bit tricky. Remove two screws from the back plate, and two screws from the main board, then carefully push on the screen to make enough room to swap out the original buttons from the front. Fusion…
Because whoever designed this type of computer case has never seen a cat, or heard of one, for that matter, I had to design this cover so they don't shutdown my computer while I'm using my ninja 3D design skills to create stuff. Print the…
Meet Button Dolly, your new quirky friend! Unique, charming, and a bit mysterious. This little doll, with her oversized button eyes and pink bow, brings a delightful mix of cute and spooky vibes. It's designed as a keychain, so you can…
The Power Button of my wife's Lenovo Thinkpad T570 was broken and get's stuck in the case. So i decided to make a replacement. I printed the button from Nylon. To Repair the Button you have to do following steps. Remove the battery…
I couldn't find a model of the common magazine release button on the M-series. (Maybe I didn't search well) So I just did it myself. Tested on CYMA PJ. Works same as default. To assely needs one m3*8 screw and default spring. Have fun,…
This TPU plate will protect the buttons on the X1 / X1C from accidental activation or heavy impact… I've pressed the buttons a few too many times with my arm or hand without looking... So, I find it very useful… specially, while printing……
I didn't want the cover to be any bigger than necessary, so I made the opening square to allow a tighter fit around the square button on this Fractal Design case. Printed at 75% it's a perfect fit. In this case, the offending kitty is…
Unfortunately Fairphone 6 volume buttons are prone to breaking and are not provided by the company for own replacement. The buttons are hidden under a seal that is also prone to leaking when the button cracks, so it is impossible to get…
This script creates an array of random buttons. You can define the number of buttons to create, and each button will have a different size, edge, design, etc. Print them in one go and use them for scrapbooking, button monsters, etc.…
This is USE AT YOUR OWN RISK device for a standard Trubeam console, I make no statement about whether or not using this is a good idea. Since the device pops on and pops off as needed, I am personally okay with the use. Therapists can use…
I included a .step file if anybody would like to edit or customize this file
32mm wrench for arcade button nylon nuts. Works on Happ and happ clone buttons. Not sure about other ones but I don't have other ones. Print instructions Category: Video Games Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Yes…
Support surélevé pour Mac Mini M4 Ce socle pour Mac Mini M4 surélève l’appareil tout en intégrant un mécanisme permettant de déporter le bouton d’alimentation vers le dessus. Idéal pour un accès rapide sans avoir à manipuler le boîtier à…
Just remove the original damaged membrane with pliers and insert the replaced part.
I made this part a year ago for somebody in my family. Unfortunately I have only one photo of that part (I will do more if only had a chance). Anyway it works till now :-) Support has been added to the model, do not need to add any in a…
Tired of accidentally hitting those channel buttons on the bottom of your Roku remote? Well not anymore! Every other solution I've found, involved taking apart the remote to replace the buttons or disable them. Now you can just clip this…
This is a conversion kit for Sanwa 24 sized button to 30 sized buttons. The 30 sized triggers will fit right into these. Just make sure the extrusion multiplier for your filament is on point! (0.45 mm wall thickness on test prints). Use…
This design helps keep dust from getting inside the Floatwheel's Power Button socket. The design is perfectly integrated inside the rails and leaves just under 1 mm gap between cover and button, it should also be compatible with the…
These are round low profile button caps in various sizes designed for FDM printing. A cross stem has been utilised, making them compatible with devices utilising MX/Choc V2 switches. These have been designed to match the button holes used…
Lithophane in the shape of a part globe or dome. Depicts a Nativity Scene with shepherds and other people coming to see baby Jesus in the manger. The dome is designed to be set on top of a LED push--button puck-light. The hole in the…
Simple print to fill in the bottom advertisement buttons! I always push them grabbing the remote and finally pissed me off enough to create this. If someone prints this with glow in the dark filament, please post pics! Steps: 1 - Remove…
Ein einfacher Powerbutton für Garmin Oregon 450. Er muss mit TPU oder Flex Material gedruckt und dannach eingeklebt werden. A simple power button for Garmin Oregon 450. It has to be printed with TPU or Flex material and then glued in…
A small off/on or pole-reversing switch for the fischertechnik construction toy system. Uses a 8x8 mm push-button switch found as a no name item on ebay , I assume it's a K8-8081D-L1 from Korean manufacturer HRO . The off/on version needs…
Tired of picking up your Logitech Z407 remote to switch audio sources? This print bring the buttons that are on the bottom of the Logitech Z407 Dial/Puck/Remote out to the front. Now you can just leave the remote on your desk. To…
A replacement for the Removable Volume buttons of the Original Farefone-6 Case, in case you loose it, like i did :D
Instructions This conversion only works for rocker switches. New rockers with plenty of spring action work best. If you have toggle switches, you will need to change them out. Box Assembly Place all of your rings into the lid and set face…
Simple arcade button that houses a mouse microswitch
One primitive arrowhead button for those who need to add some archery-themed highlights to their wardrobe. The second version has the button holes rotated 45º.
I saw the model "ESP32-C3 "supermini" case for simple led strip" that @tigert_36892 had made, and thought that what it lacked was the ability for the buttons to be used. Aside from that it was a geniously simple design. So I started…
I've been working on a a Luigi's Mansion 3 style keyboard for awhile. The keycap design contest was the push I needed to make the next improvement. I tried taking the buttons from a different model and just slapping a cherry stem on it…
These are button caps that can be popped onto the buttons on the Thrustmaster Sparco rally wheel R 383 mod. For some reason Thrustmaster puts these buttons in a totally random order and I got tired of trying to search for the right…
A compact and functional 3D printed box designed to house a standard emergency stop button. This model is compatible with 4040 aluminum extrusion profiles, making it easy to mount on custom rigs, machinery setups, or DIY projects. Cable…
This is my version of the Happ style Arcade Button. I needed to replace a few on my machine and didn't wat to buy one so I got out the tools and created my own.
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
This was created to fit a UTG Pro handguard on an MP5K/SP5K which utilizes a single MLOK slot on the 12 o clock and 9 o clock positions of the handguard. It occupies a single MLOK slot and uses M3 hardware 2x(M3 nut + M3x30mm hex socket…
You can use this for plugging spare 24mm holes in your arcade stick. If you're interested or would like to slightly tweak the model, here is a link to the source code .
Tesla S3XY Buttons 4-Button Center Console Holder Snug fit that stays in place when both center console doors are open, and the height and width match up perfectly with factory center console doors. Check out my Etsy store to purchase…
This is a case based on the HiLetgo (or similar) MP3 Decoder Player module (non Bluetooth version) found on Amazon. The case has almost no tolerance so the board itself may fit snugly depending on your slicer and print quality methods…
Lost a button on my trousers and had no needle or thread at hand, so i came up with this idea. After printing (use PETG) just snap the button in place where the original button used to be. If the fabric is to thic, it might wont attach…
I created this handy little wrench to tighten pinball button nuts. I use it on my Stern pinball machine. I used PETG filament with 100% infill. IMPORTANT : with some slicers it is possible to encounter proportions issue. It is a know…
Stick it onto your appliance with double-sided tape. Add a filament change for a popping power logo Note : Feel free to ask for a different logo in the comments and I'll do my best to make it happen
More information and details on github page https://github.com/FYSETC/Hotkey
Minimal symmetrical box for 30mm arcade buttons, specifically the Swerry Button for Cherry mechanical keyboard switches , but theoretically should work with any 30mm arcade buttons; just check the total depth. The photo of the black print…
Rounded Square Large size 30x30mm and 71x30mm Print with no support with the tactile part down
I've been really into fightsticks for a while and finally decided to print a case and hand wire a cheap brook board to get a hitbox/junkbox-esque controller made. My kailh choc switches were taking so long to ship out, so I decided to use…
