1 / 3

Button Box Bell-shape (parametric)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€4.23 – €5.17 net (excluding VAT)

For file: button_bell_stand_50mm_0.6n_0.25mm_PLA_MK4S_3h30m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.70 excluding VAT (range midpoint).

Weight reported by the author: 84 g
Print time reported by the author: 3.5 hr
Source material: PLA
Estimate material: PLA
Estimate printer: Bambu Lab P1S - 0.4 nozzle
Estimate process: 0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

xro

@xro42

a box (half-sphere shaped) or holder for a button. Can fit any button due to FreeCAD parametric design.

Rating: 0 / 5
Likes: 4
Downloads: 12
Makes: 0
Views: 51
Reviews: 0

Updated at source: Jun 18, 2025

Model information

Source: Printables
Category: Electronics
License: Creative Commons — Attribution — Share Alike

Details Files (10)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (1)

We needed a button for our drink-randomizer game built using my LED-Drink-Coaster-Puzzle. I had this button, so I designed this box. Here you go :-)

Printing

any nice material, e.g. Prusament Galaxy PLA
support: yes
- but with bigger nozzle and variable layer height, you might get away without using support
any nozzle size, any layer height.

Which Buttons?

pre-sliced for these sizes:

25mm Hole Diameter and 50mm height: Ali-Button
12mm or 16mm or 19mm or 22mm Hole Diameter Ali-Buttons

Change Parameters for any button size

message me with height and diameter of your Button to upload a variant for you
OR scale as needed in slicer
OR use FreeCAD:

open Spreadsheet in the tree
change cells ButtonDiameter and Button Height to fit your button
select both BodyButtonBellCase and BodyButtonBellBottom and export as .3mf
adjust orientation in Slicer
print

License

share and remix as you like, but never without attribution

Support

please like the model :-)

Social Media

This model can also be found on the Fediverse