Brutus Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple easy to print mount to attach core flute Christmas props to Brutus 8mm x 1250mm Yellow Site Stakes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Share Alike
The Brutus 8mm x 1250mm Yellow Site Stake commonly found at Bunnings Warehouse in Australia - along with some black spray paint - makes for a relatively inexpensive mount for core flute Christmas props, it isn't very stiff and may sway in the wind but is otherwise strong enough (I have a couple of props where the sway could be dangerous, I just preload it in one direction with fishing line and a tent stake, takes out most of it)
Print this out in PETG and grab 6 of your favourite 2-2.5mm zip ties and go to town. I've included a dxf/svg/png of the cutting guide for the corresponding coro so no matter how you're manufacturing you should be able to get what you need.
I do counter-intuitively print this flat on the bed with the flat foot down as it provides for me the cleanest print with least issues, ymmv on the strength department, I print it a little hotter for better layer adhesion