Square Leg Telescope Tripod Tray Bracket Meade Celestron Skywatcher ETC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement accessory tray bracket for square legged Equatorial mount tripods (Meade 4500, older Celestron/Skywatcher EQ
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you find my designs useful, please consider sending a tip
Replacement accessory tray bracket for square legged Equatorial mount tripods (Meade 4500, older Celestron and Skywatcher EQ Tripods etc)
Our astronomical society received a 5" telescope as a donation. The EQ mount tripod was missing the 2 small brackets that hold the pin and plate for the triangular accessory tray in the middle of the tripod. There were no markings on the scope, mount or tripod but it appears the legs are the same as a Meade 4500 or the older style square tube tripods out there..
Replacement designed from taking measurements from the original brackets on the other legs.
I printed mine in PLA at 0.2 with 100% infil, they seem strong enough but you may wish to use a stronger material.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
0.2 or higher
Infill:
100
Category: Physics & Astronomy